source: doc/devel.cfg @ b49daf6

feature/autosinkfeature/cnnfeature/cnn_orgfeature/constantqfeature/crepefeature/crepe_orgfeature/pitchshiftfeature/pydocstringsfeature/timestretchfix/ffmpeg5pitchshiftsamplertimestretchyinfft+
Last change on this file since b49daf6 was 96fb8ad, checked in by Paul Brossier <piem@altern.org>, 20 years ago

import 0.1.7.1

  • Property mode set to 100644
File size: 42.7 KB
Line 
1# Doxyfile 1.3.4
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8#       TAG = value [value, ...]
9# For lists items can also be appended using:
10#       TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
18# by quotes) that should identify the project.
19
20PROJECT_NAME           = aubio
21
22# The PROJECT_NUMBER tag can be used to enter a project or revision number.
23# This could be handy for archiving the generated documentation or
24# if some version control system is used.
25
26PROJECT_NUMBER         = 0.1.6
27
28# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
29# base path where the generated documentation will be put.
30# If a relative path is entered, it will be relative to the location
31# where doxygen was started. If left blank the current directory will be used.
32
33OUTPUT_DIRECTORY       = devel
34
35# The OUTPUT_LANGUAGE tag is used to specify the language in which all
36# documentation generated by doxygen is written. Doxygen will use this
37# information to generate all constant output in the proper language.
38# The default language is English, other supported languages are:
39# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch,
40# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en
41# (Japanese with English messages), Korean, Norwegian, Polish, Portuguese,
42# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
43
44OUTPUT_LANGUAGE        = English
45
46# This tag can be used to specify the encoding used in the generated output.
47# The encoding is not always determined by the language that is chosen,
48# but also whether or not the output is meant for Windows or non-Windows users.
49# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
50# forces the Windows encoding (this is the default for the Windows binary),
51# whereas setting the tag to NO uses a Unix-style encoding (the default for
52# all platforms other than Windows).
53
54USE_WINDOWS_ENCODING   = NO
55
56# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
57# include brief member descriptions after the members that are listed in
58# the file and class documentation (similar to JavaDoc).
59# Set to NO to disable this.
60
61BRIEF_MEMBER_DESC      = YES
62
63# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
64# the brief description of a member or function before the detailed description.
65# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
66# brief descriptions will be completely suppressed.
67
68REPEAT_BRIEF           = YES
69
70# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
71# Doxygen will generate a detailed section even if there is only a brief
72# description.
73
74ALWAYS_DETAILED_SEC    = NO
75
76# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited
77# members of a class in the documentation of that class as if those members were
78# ordinary class members. Constructors, destructors and assignment operators of
79# the base classes will not be shown.
80
81INLINE_INHERITED_MEMB  = NO
82
83# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
84# path before files name in the file list and in the header files. If set
85# to NO the shortest path that makes the file name unique will be used.
86
87FULL_PATH_NAMES        = NO
88
89# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
90# can be used to strip a user-defined part of the path. Stripping is
91# only done if one of the specified strings matches the left-hand part of
92# the path. It is allowed to use relative paths in the argument list.
93
94STRIP_FROM_PATH        = 
95
96# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
97# (but less readable) file names. This can be useful is your file systems
98# doesn't support long names like on DOS, Mac, or CD-ROM.
99
100SHORT_NAMES            = NO
101
102# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
103# will interpret the first line (until the first dot) of a JavaDoc-style
104# comment as the brief description. If set to NO, the JavaDoc
105# comments will behave just like the Qt-style comments (thus requiring an
106# explict @brief command for a brief description.
107
108JAVADOC_AUTOBRIEF      = YES
109
110# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
111# treat a multi-line C++ special comment block (i.e. a block of //! or ///
112# comments) as a brief description. This used to be the default behaviour.
113# The new default is to treat a multi-line C++ comment block as a detailed
114# description. Set this tag to YES if you prefer the old behaviour instead.
115
116MULTILINE_CPP_IS_BRIEF = NO
117
118# If the DETAILS_AT_TOP tag is set to YES then Doxygen
119# will output the detailed description near the top, like JavaDoc.
120# If set to NO, the detailed description appears after the member
121# documentation.
122
123DETAILS_AT_TOP         = NO
124
125# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
126# member inherits the documentation from any documented member that it
127# reimplements.
128
129INHERIT_DOCS           = YES
130
131# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
132# tag is set to YES, then doxygen will reuse the documentation of the first
133# member in the group (if any) for the other members of the group. By default
134# all members of a group must be documented explicitly.
135
136DISTRIBUTE_GROUP_DOC   = NO
137
138# The TAB_SIZE tag can be used to set the number of spaces in a tab.
139# Doxygen uses this value to replace tabs by spaces in code fragments.
140
141TAB_SIZE               = 4
142
143# This tag can be used to specify a number of aliases that acts
144# as commands in the documentation. An alias has the form "name=value".
145# For example adding "sideeffect=\par Side Effects:\n" will allow you to
146# put the command \sideeffect (or @sideeffect) in the documentation, which
147# will result in a user-defined paragraph with heading "Side Effects:".
148# You can put \n's in the value part of an alias to insert newlines.
149
150ALIASES                = 
151
152# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
153# only. Doxygen will then generate output that is more tailored for C.
154# For instance, some of the names that are used will be different. The list
155# of all members will be omitted, etc.
156
157OPTIMIZE_OUTPUT_FOR_C  = YES
158
159# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
160# only. Doxygen will then generate output that is more tailored for Java.
161# For instance, namespaces will be presented as packages, qualified scopes
162# will look different, etc.
163
164OPTIMIZE_OUTPUT_JAVA   = NO
165
166# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
167# the same type (for instance a group of public functions) to be put as a
168# subgroup of that type (e.g. under the Public Functions section). Set it to
169# NO to prevent subgrouping. Alternatively, this can be done per class using
170# the \nosubgrouping command.
171
172SUBGROUPING            = YES
173
174#---------------------------------------------------------------------------
175# Build related configuration options
176#---------------------------------------------------------------------------
177
178# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
179# documentation are documented, even if no documentation was available.
180# Private class members and static file members will be hidden unless
181# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
182
183EXTRACT_ALL            = YES
184
185# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
186# will be included in the documentation.
187
188EXTRACT_PRIVATE        = YES
189
190# If the EXTRACT_STATIC tag is set to YES all static members of a file
191# will be included in the documentation.
192
193EXTRACT_STATIC         = YES
194
195# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
196# defined locally in source files will be included in the documentation.
197# If set to NO only classes defined in header files are included.
198
199EXTRACT_LOCAL_CLASSES  = YES
200
201# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
202# undocumented members of documented classes, files or namespaces.
203# If set to NO (the default) these members will be included in the
204# various overviews, but no documentation section is generated.
205# This option has no effect if EXTRACT_ALL is enabled.
206
207HIDE_UNDOC_MEMBERS     = NO
208
209# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
210# undocumented classes that are normally visible in the class hierarchy.
211# If set to NO (the default) these classes will be included in the various
212# overviews. This option has no effect if EXTRACT_ALL is enabled.
213
214HIDE_UNDOC_CLASSES     = NO
215
216# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
217# friend (class|struct|union) declarations.
218# If set to NO (the default) these declarations will be included in the
219# documentation.
220
221HIDE_FRIEND_COMPOUNDS  = NO
222
223# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
224# documentation blocks found inside the body of a function.
225# If set to NO (the default) these blocks will be appended to the
226# function's detailed documentation block.
227
228HIDE_IN_BODY_DOCS      = NO
229
230# The INTERNAL_DOCS tag determines if documentation
231# that is typed after a \internal command is included. If the tag is set
232# to NO (the default) then the documentation will be excluded.
233# Set it to YES to include the internal documentation.
234
235INTERNAL_DOCS          = NO
236
237# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
238# file names in lower-case letters. If set to YES upper-case letters are also
239# allowed. This is useful if you have classes or files whose names only differ
240# in case and if your file system supports case sensitive file names. Windows
241# users are advised to set this option to NO.
242
243CASE_SENSE_NAMES       = YES
244
245# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
246# will show members with their full class and namespace scopes in the
247# documentation. If set to YES the scope will be hidden.
248
249HIDE_SCOPE_NAMES       = NO
250
251# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
252# will put a list of the files that are included by a file in the documentation
253# of that file.
254
255SHOW_INCLUDE_FILES     = YES
256
257# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
258# is inserted in the documentation for inline members.
259
260INLINE_INFO            = YES
261
262# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
263# will sort the (detailed) documentation of file and class members
264# alphabetically by member name. If set to NO the members will appear in
265# declaration order.
266
267SORT_MEMBER_DOCS       = YES
268
269# The GENERATE_TODOLIST tag can be used to enable (YES) or
270# disable (NO) the todo list. This list is created by putting \todo
271# commands in the documentation.
272
273GENERATE_TODOLIST      = YES
274
275# The GENERATE_TESTLIST tag can be used to enable (YES) or
276# disable (NO) the test list. This list is created by putting \test
277# commands in the documentation.
278
279GENERATE_TESTLIST      = YES
280
281# The GENERATE_BUGLIST tag can be used to enable (YES) or
282# disable (NO) the bug list. This list is created by putting \bug
283# commands in the documentation.
284
285GENERATE_BUGLIST       = YES
286
287# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
288# disable (NO) the deprecated list. This list is created by putting
289# \deprecated commands in the documentation.
290
291GENERATE_DEPRECATEDLIST= YES
292
293# The ENABLED_SECTIONS tag can be used to enable conditional
294# documentation sections, marked by \if sectionname ... \endif.
295
296ENABLED_SECTIONS       = 
297
298# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
299# the initial value of a variable or define consists of for it to appear in
300# the documentation. If the initializer consists of more lines than specified
301# here it will be hidden. Use a value of 0 to hide initializers completely.
302# The appearance of the initializer of individual variables and defines in the
303# documentation can be controlled using \showinitializer or \hideinitializer
304# command in the documentation regardless of this setting.
305
306MAX_INITIALIZER_LINES  = 30
307
308# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
309# at the bottom of the documentation of classes and structs. If set to YES the
310# list will mention the files that were used to generate the documentation.
311
312SHOW_USED_FILES        = YES
313
314#---------------------------------------------------------------------------
315# configuration options related to warning and progress messages
316#---------------------------------------------------------------------------
317
318# The QUIET tag can be used to turn on/off the messages that are generated
319# by doxygen. Possible values are YES and NO. If left blank NO is used.
320
321QUIET                  = NO
322
323# The WARNINGS tag can be used to turn on/off the warning messages that are
324# generated by doxygen. Possible values are YES and NO. If left blank
325# NO is used.
326
327WARNINGS               = YES
328
329# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
330# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
331# automatically be disabled.
332
333WARN_IF_UNDOCUMENTED   = YES
334
335# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
336# potential errors in the documentation, such as not documenting some
337# parameters in a documented function, or documenting parameters that
338# don't exist or using markup commands wrongly.
339
340WARN_IF_DOC_ERROR      = YES
341
342# The WARN_FORMAT tag determines the format of the warning messages that
343# doxygen can produce. The string should contain the $file, $line, and $text
344# tags, which will be replaced by the file and line number from which the
345# warning originated and the warning text.
346
347WARN_FORMAT            = "$file:$line: $text"
348
349# The WARN_LOGFILE tag can be used to specify a file to which warning
350# and error messages should be written. If left blank the output is written
351# to stderr.
352
353WARN_LOGFILE           = 
354
355#---------------------------------------------------------------------------
356# configuration options related to the input files
357#---------------------------------------------------------------------------
358
359# The INPUT tag can be used to specify the files and/or directories that contain
360# documented source files. You may enter file names like "myfile.cpp" or
361# directories like "/usr/src/myproject". Separate the files or directories
362# with spaces.
363
364#INPUT                  = src examples
365INPUT                  = ../src
366
367# If the value of the INPUT tag contains directories, you can use the
368# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
369# and *.h) to filter out the source-files in the directories. If left
370# blank the following patterns are tested:
371# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp
372# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc
373
374FILE_PATTERNS          = 
375
376# The RECURSIVE tag can be used to turn specify whether or not subdirectories
377# should be searched for input files as well. Possible values are YES and NO.
378# If left blank NO is used.
379
380RECURSIVE              = NO
381
382# The EXCLUDE tag can be used to specify files and/or directories that should
383# excluded from the INPUT source files. This way you can easily exclude a
384# subdirectory from a directory tree whose root is specified with the INPUT tag.
385
386EXCLUDE                = 
387
388# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories
389# that are symbolic links (a Unix filesystem feature) are excluded from the input.
390
391EXCLUDE_SYMLINKS       = NO
392
393# If the value of the INPUT tag contains directories, you can use the
394# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
395# certain files from those directories.
396
397EXCLUDE_PATTERNS       = 
398
399# The EXAMPLE_PATH tag can be used to specify one or more files or
400# directories that contain example code fragments that are included (see
401# the \include command).
402
403EXAMPLE_PATH           = examples
404
405# If the value of the EXAMPLE_PATH tag contains directories, you can use the
406# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
407# and *.h) to filter out the source-files in the directories. If left
408# blank all files are included.
409
410EXAMPLE_PATTERNS       = 
411
412# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
413# searched for input files to be used with the \include or \dontinclude
414# commands irrespective of the value of the RECURSIVE tag.
415# Possible values are YES and NO. If left blank NO is used.
416
417EXAMPLE_RECURSIVE      = NO
418
419# The IMAGE_PATH tag can be used to specify one or more files or
420# directories that contain image that are included in the documentation (see
421# the \image command).
422
423IMAGE_PATH             = 
424
425# The INPUT_FILTER tag can be used to specify a program that doxygen should
426# invoke to filter for each input file. Doxygen will invoke the filter program
427# by executing (via popen()) the command <filter> <input-file>, where <filter>
428# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
429# input file. Doxygen will then use the output that the filter program writes
430# to standard output.
431
432INPUT_FILTER           = 
433
434# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
435# INPUT_FILTER) will be used to filter the input files when producing source
436# files to browse (i.e. when SOURCE_BROWSER is set to YES).
437
438FILTER_SOURCE_FILES    = NO
439
440#---------------------------------------------------------------------------
441# configuration options related to source browsing
442#---------------------------------------------------------------------------
443
444# If the SOURCE_BROWSER tag is set to YES then a list of source files will
445# be generated. Documented entities will be cross-referenced with these sources.
446
447#SOURCE_BROWSER         = NO
448SOURCE_BROWSER         = YES
449
450# Setting the INLINE_SOURCES tag to YES will include the body
451# of functions and classes directly in the documentation.
452
453INLINE_SOURCES         = NO
454
455# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
456# doxygen to hide any special comment blocks from generated source code
457# fragments. Normal C and C++ comments will always remain visible.
458
459STRIP_CODE_COMMENTS    = YES
460
461# If the REFERENCED_BY_RELATION tag is set to YES (the default)
462# then for each documented function all documented
463# functions referencing it will be listed.
464
465REFERENCED_BY_RELATION = YES
466
467# If the REFERENCES_RELATION tag is set to YES (the default)
468# then for each documented function all documented entities
469# called/used by that function will be listed.
470
471REFERENCES_RELATION    = YES
472
473# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
474# will generate a verbatim copy of the header file for each class for
475# which an include is specified. Set to NO to disable this.
476
477VERBATIM_HEADERS       = YES
478
479#---------------------------------------------------------------------------
480# configuration options related to the alphabetical class index
481#---------------------------------------------------------------------------
482
483# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
484# of all compounds will be generated. Enable this if the project
485# contains a lot of classes, structs, unions or interfaces.
486
487ALPHABETICAL_INDEX     = NO
488
489# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
490# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
491# in which this list will be split (can be a number in the range [1..20])
492
493COLS_IN_ALPHA_INDEX    = 5
494
495# In case all classes in a project start with a common prefix, all
496# classes will be put under the same header in the alphabetical index.
497# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
498# should be ignored while generating the index headers.
499
500IGNORE_PREFIX          = 
501
502#---------------------------------------------------------------------------
503# configuration options related to the HTML output
504#---------------------------------------------------------------------------
505
506# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
507# generate HTML output.
508
509GENERATE_HTML          = YES
510
511# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
512# If a relative path is entered the value of OUTPUT_DIRECTORY will be
513# put in front of it. If left blank `html' will be used as the default path.
514
515HTML_OUTPUT            = html
516
517# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
518# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
519# doxygen will generate files with .html extension.
520
521HTML_FILE_EXTENSION    = .html
522
523# The HTML_HEADER tag can be used to specify a personal HTML header for
524# each generated HTML page. If it is left blank doxygen will generate a
525# standard header.
526
527HTML_HEADER            = 
528
529# The HTML_FOOTER tag can be used to specify a personal HTML footer for
530# each generated HTML page. If it is left blank doxygen will generate a
531# standard footer.
532
533HTML_FOOTER            = 
534
535# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
536# style sheet that is used by each HTML page. It can be used to
537# fine-tune the look of the HTML output. If the tag is left blank doxygen
538# will generate a default style sheet
539
540HTML_STYLESHEET        = aubio.css
541
542# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
543# files or namespaces will be aligned in HTML using tables. If set to
544# NO a bullet list will be used.
545
546HTML_ALIGN_MEMBERS     = YES
547
548# If the GENERATE_HTMLHELP tag is set to YES, additional index files
549# will be generated that can be used as input for tools like the
550# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
551# of the generated HTML documentation.
552
553GENERATE_HTMLHELP      = NO
554
555# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
556# be used to specify the file name of the resulting .chm file. You
557# can add a path in front of the file if the result should not be
558# written to the html output dir.
559
560CHM_FILE               = 
561
562# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
563# be used to specify the location (absolute path including file name) of
564# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
565# the HTML help compiler on the generated index.hhp.
566
567HHC_LOCATION           = 
568
569# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
570# controls if a separate .chi index file is generated (YES) or that
571# it should be included in the master .chm file (NO).
572
573GENERATE_CHI           = NO
574
575# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
576# controls whether a binary table of contents is generated (YES) or a
577# normal table of contents (NO) in the .chm file.
578
579BINARY_TOC             = NO
580
581# The TOC_EXPAND flag can be set to YES to add extra items for group members
582# to the contents of the HTML help documentation and to the tree view.
583
584TOC_EXPAND             = NO
585
586# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
587# top of each HTML page. The value NO (the default) enables the index and
588# the value YES disables it.
589
590DISABLE_INDEX          = NO
591
592# This tag can be used to set the number of enum values (range [1..20])
593# that doxygen will group on one line in the generated HTML documentation.
594
595ENUM_VALUES_PER_LINE   = 4
596
597# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
598# generated containing a tree-like index structure (just like the one that
599# is generated for HTML Help). For this to work a browser that supports
600# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
601# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
602# probably better off using the HTML help feature.
603
604GENERATE_TREEVIEW      = NO
605
606# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
607# used to set the initial width (in pixels) of the frame in which the tree
608# is shown.
609
610TREEVIEW_WIDTH         = 250
611
612#---------------------------------------------------------------------------
613# configuration options related to the LaTeX output
614#---------------------------------------------------------------------------
615
616# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
617# generate Latex output.
618
619GENERATE_LATEX         = YES
620
621# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
622# If a relative path is entered the value of OUTPUT_DIRECTORY will be
623# put in front of it. If left blank `latex' will be used as the default path.
624
625LATEX_OUTPUT           = latex
626
627# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
628# invoked. If left blank `latex' will be used as the default command name.
629
630LATEX_CMD_NAME         = latex
631
632# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
633# generate index for LaTeX. If left blank `makeindex' will be used as the
634# default command name.
635
636MAKEINDEX_CMD_NAME     = makeindex
637
638# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
639# LaTeX documents. This may be useful for small projects and may help to
640# save some trees in general.
641
642COMPACT_LATEX          = NO
643
644# The PAPER_TYPE tag can be used to set the paper type that is used
645# by the printer. Possible values are: a4, a4wide, letter, legal and
646# executive. If left blank a4wide will be used.
647
648PAPER_TYPE             = a4wide
649
650# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
651# packages that should be included in the LaTeX output.
652
653EXTRA_PACKAGES         = 
654
655# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
656# the generated latex document. The header should contain everything until
657# the first chapter. If it is left blank doxygen will generate a
658# standard header. Notice: only use this tag if you know what you are doing!
659
660LATEX_HEADER           = 
661
662# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
663# is prepared for conversion to pdf (using ps2pdf). The pdf file will
664# contain links (just like the HTML output) instead of page references
665# This makes the output suitable for online browsing using a pdf viewer.
666
667PDF_HYPERLINKS         = NO
668
669# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
670# plain latex in the generated Makefile. Set this option to YES to get a
671# higher quality PDF documentation.
672
673USE_PDFLATEX           = NO
674
675# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
676# command to the generated LaTeX files. This will instruct LaTeX to keep
677# running if errors occur, instead of asking the user for help.
678# This option is also used when generating formulas in HTML.
679
680LATEX_BATCHMODE        = NO
681
682# If LATEX_HIDE_INDICES is set to YES then doxygen will not
683# include the index chapters (such as File Index, Compound Index, etc.)
684# in the output.
685
686LATEX_HIDE_INDICES     = NO
687
688#---------------------------------------------------------------------------
689# configuration options related to the RTF output
690#---------------------------------------------------------------------------
691
692# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
693# The RTF output is optimised for Word 97 and may not look very pretty with
694# other RTF readers or editors.
695
696GENERATE_RTF           = NO
697
698# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
699# If a relative path is entered the value of OUTPUT_DIRECTORY will be
700# put in front of it. If left blank `rtf' will be used as the default path.
701
702RTF_OUTPUT             = rtf
703
704# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
705# RTF documents. This may be useful for small projects and may help to
706# save some trees in general.
707
708COMPACT_RTF            = NO
709
710# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
711# will contain hyperlink fields. The RTF file will
712# contain links (just like the HTML output) instead of page references.
713# This makes the output suitable for online browsing using WORD or other
714# programs which support those fields.
715# Note: wordpad (write) and others do not support links.
716
717RTF_HYPERLINKS         = NO
718
719# Load stylesheet definitions from file. Syntax is similar to doxygen's
720# config file, i.e. a series of assigments. You only have to provide
721# replacements, missing definitions are set to their default value.
722
723RTF_STYLESHEET_FILE    = 
724
725# Set optional variables used in the generation of an rtf document.
726# Syntax is similar to doxygen's config file.
727
728RTF_EXTENSIONS_FILE    = 
729
730#---------------------------------------------------------------------------
731# configuration options related to the man page output
732#---------------------------------------------------------------------------
733
734# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
735# generate man pages
736
737GENERATE_MAN           = NO
738
739# The MAN_OUTPUT tag is used to specify where the man pages will be put.
740# If a relative path is entered the value of OUTPUT_DIRECTORY will be
741# put in front of it. If left blank `man' will be used as the default path.
742
743MAN_OUTPUT             = man
744
745# The MAN_EXTENSION tag determines the extension that is added to
746# the generated man pages (default is the subroutine's section .3)
747
748MAN_EXTENSION          = .3
749
750# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
751# then it will generate one additional man file for each entity
752# documented in the real man page(s). These additional files
753# only source the real man page, but without them the man command
754# would be unable to find the correct page. The default is NO.
755
756MAN_LINKS              = NO
757
758#---------------------------------------------------------------------------
759# configuration options related to the XML output
760#---------------------------------------------------------------------------
761
762# If the GENERATE_XML tag is set to YES Doxygen will
763# generate an XML file that captures the structure of
764# the code including all documentation. Note that this
765# feature is still experimental and incomplete at the
766# moment.
767
768GENERATE_XML           = NO
769
770# The XML_OUTPUT tag is used to specify where the XML pages will be put.
771# If a relative path is entered the value of OUTPUT_DIRECTORY will be
772# put in front of it. If left blank `xml' will be used as the default path.
773
774XML_OUTPUT             = xml
775
776# The XML_SCHEMA tag can be used to specify an XML schema,
777# which can be used by a validating XML parser to check the
778# syntax of the XML files.
779
780XML_SCHEMA             = 
781
782# The XML_DTD tag can be used to specify an XML DTD,
783# which can be used by a validating XML parser to check the
784# syntax of the XML files.
785
786XML_DTD                = 
787
788#---------------------------------------------------------------------------
789# configuration options for the AutoGen Definitions output
790#---------------------------------------------------------------------------
791
792# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
793# generate an AutoGen Definitions (see autogen.sf.net) file
794# that captures the structure of the code including all
795# documentation. Note that this feature is still experimental
796# and incomplete at the moment.
797
798GENERATE_AUTOGEN_DEF   = NO
799
800#---------------------------------------------------------------------------
801# configuration options related to the Perl module output
802#---------------------------------------------------------------------------
803
804# If the GENERATE_PERLMOD tag is set to YES Doxygen will
805# generate a Perl module file that captures the structure of
806# the code including all documentation. Note that this
807# feature is still experimental and incomplete at the
808# moment.
809
810GENERATE_PERLMOD       = NO
811
812# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
813# the necessary Makefile rules, Perl scripts and LaTeX code to be able
814# to generate PDF and DVI output from the Perl module output.
815
816PERLMOD_LATEX          = NO
817
818# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
819# nicely formatted so it can be parsed by a human reader.  This is useful
820# if you want to understand what is going on.  On the other hand, if this
821# tag is set to NO the size of the Perl module output will be much smaller
822# and Perl will parse it just the same.
823
824PERLMOD_PRETTY         = YES
825
826# The names of the make variables in the generated doxyrules.make file
827# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
828# This is useful so different doxyrules.make files included by the same
829# Makefile don't overwrite each other's variables.
830
831PERLMOD_MAKEVAR_PREFIX = 
832
833#---------------------------------------------------------------------------
834# Configuration options related to the preprocessor   
835#---------------------------------------------------------------------------
836
837# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
838# evaluate all C-preprocessor directives found in the sources and include
839# files.
840
841ENABLE_PREPROCESSING   = YES
842
843# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
844# names in the source code. If set to NO (the default) only conditional
845# compilation will be performed. Macro expansion can be done in a controlled
846# way by setting EXPAND_ONLY_PREDEF to YES.
847
848MACRO_EXPANSION        = NO
849
850# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
851# then the macro expansion is limited to the macros specified with the
852# PREDEFINED and EXPAND_AS_PREDEFINED tags.
853
854EXPAND_ONLY_PREDEF     = NO
855
856# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
857# in the INCLUDE_PATH (see below) will be search if a #include is found.
858
859SEARCH_INCLUDES        = YES
860
861# The INCLUDE_PATH tag can be used to specify one or more directories that
862# contain include files that are not input files but should be processed by
863# the preprocessor.
864
865INCLUDE_PATH           = 
866
867# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
868# patterns (like *.h and *.hpp) to filter out the header-files in the
869# directories. If left blank, the patterns specified with FILE_PATTERNS will
870# be used.
871
872INCLUDE_FILE_PATTERNS  = 
873
874# The PREDEFINED tag can be used to specify one or more macro names that
875# are defined before the preprocessor is started (similar to the -D option of
876# gcc). The argument of the tag is a list of macros of the form: name
877# or name=definition (no spaces). If the definition and the = are
878# omitted =1 is assumed.
879
880PREDEFINED             = 
881
882# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
883# this tag can be used to specify a list of macro names that should be expanded.
884# The macro definition that is found in the sources will be used.
885# Use the PREDEFINED tag if you want to use a different macro definition.
886
887EXPAND_AS_DEFINED      = 
888
889# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
890# doxygen's preprocessor will remove all function-like macros that are alone
891# on a line, have an all uppercase name, and do not end with a semicolon. Such
892# function macros are typically used for boiler-plate code, and will confuse the
893# parser if not removed.
894
895SKIP_FUNCTION_MACROS   = YES
896
897#---------------------------------------------------------------------------
898# Configuration::addtions related to external references   
899#---------------------------------------------------------------------------
900
901# The TAGFILES option can be used to specify one or more tagfiles.
902# Optionally an initial location of the external documentation
903# can be added for each tagfile. The format of a tag file without
904# this location is as follows:
905#   TAGFILES = file1 file2 ...
906# Adding location for the tag files is done as follows:
907#   TAGFILES = file1=loc1 "file2 = loc2" ...
908# where "loc1" and "loc2" can be relative or absolute paths or
909# URLs. If a location is present for each tag, the installdox tool
910# does not have to be run to correct the links.
911# Note that each tag file must have a unique name
912# (where the name does NOT include the path)
913# If a tag file is not located in the directory in which doxygen
914# is run, you must also specify the path to the tagfile here.
915
916TAGFILES               = 
917
918# When a file name is specified after GENERATE_TAGFILE, doxygen will create
919# a tag file that is based on the input files it reads.
920
921GENERATE_TAGFILE       = 
922
923# If the ALLEXTERNALS tag is set to YES all external classes will be listed
924# in the class index. If set to NO only the inherited external classes
925# will be listed.
926
927ALLEXTERNALS           = NO
928
929# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
930# in the modules index. If set to NO, only the current project's groups will
931# be listed.
932
933EXTERNAL_GROUPS        = YES
934
935# The PERL_PATH should be the absolute path and name of the perl script
936# interpreter (i.e. the result of `which perl').
937
938PERL_PATH              = /usr/bin/perl
939
940#---------------------------------------------------------------------------
941# Configuration options related to the dot tool   
942#---------------------------------------------------------------------------
943
944# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
945# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or
946# super classes. Setting the tag to NO turns the diagrams off. Note that this
947# option is superceded by the HAVE_DOT option below. This is only a fallback. It is
948# recommended to install and use dot, since it yields more powerful graphs.
949
950CLASS_DIAGRAMS         = YES
951
952# If set to YES, the inheritance and collaboration graphs will hide
953# inheritance and usage relations if the target is undocumented
954# or is not a class.
955
956#HIDE_UNDOC_RELATIONS   = YES
957HIDE_UNDOC_RELATIONS   = NO
958
959# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
960# available from the path. This tool is part of Graphviz, a graph visualization
961# toolkit from AT&T and Lucent Bell Labs. The other options in this section
962# have no effect if this option is set to NO (the default)
963
964#HAVE_DOT               = NO
965HAVE_DOT               = YES
966
967# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
968# will generate a graph for each documented class showing the direct and
969# indirect inheritance relations. Setting this tag to YES will force the
970# the CLASS_DIAGRAMS tag to NO.
971
972CLASS_GRAPH            = YES
973
974# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
975# will generate a graph for each documented class showing the direct and
976# indirect implementation dependencies (inheritance, containment, and
977# class references variables) of the class with other documented classes.
978
979COLLABORATION_GRAPH    = YES
980
981# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
982# collaboration diagrams in a style similiar to the OMG's Unified Modeling
983# Language.
984
985UML_LOOK               = NO
986
987# If set to YES, the inheritance and collaboration graphs will show the
988# relations between templates and their instances.
989
990TEMPLATE_RELATIONS     = NO
991
992# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
993# tags are set to YES then doxygen will generate a graph for each documented
994# file showing the direct and indirect include dependencies of the file with
995# other documented files.
996
997INCLUDE_GRAPH          = YES
998
999# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1000# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1001# documented header file showing the documented files that directly or
1002# indirectly include this file.
1003
1004INCLUDED_BY_GRAPH      = YES
1005
1006# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1007# generate a call dependency graph for every global function or class method.
1008# Note that enabling this option will significantly increase the time of a run.
1009# So in most cases it will be better to enable call graphs for selected
1010# functions only using the \callgraph command.
1011
1012CALL_GRAPH             = NO
1013
1014# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1015# will graphical hierarchy of all classes instead of a textual one.
1016
1017GRAPHICAL_HIERARCHY    = YES
1018
1019# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1020# generated by dot. Possible values are png, jpg, or gif
1021# If left blank png will be used.
1022
1023DOT_IMAGE_FORMAT       = png
1024
1025# The tag DOT_PATH can be used to specify the path where the dot tool can be
1026# found. If left blank, it is assumed the dot tool can be found on the path.
1027
1028DOT_PATH               = 
1029
1030# The DOTFILE_DIRS tag can be used to specify one or more directories that
1031# contain dot files that are included in the documentation (see the
1032# \dotfile command).
1033
1034DOTFILE_DIRS           = 
1035
1036# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
1037# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1038# this value, doxygen will try to truncate the graph, so that it fits within
1039# the specified constraint. Beware that most browsers cannot cope with very
1040# large images.
1041
1042MAX_DOT_GRAPH_WIDTH    = 1024
1043
1044# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
1045# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1046# this value, doxygen will try to truncate the graph, so that it fits within
1047# the specified constraint. Beware that most browsers cannot cope with very
1048# large images.
1049
1050MAX_DOT_GRAPH_HEIGHT   = 1024
1051
1052# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1053# graphs generated by dot. A depth value of 3 means that only nodes reachable
1054# from the root by following a path via at most 3 edges will be shown. Nodes that
1055# lay further from the root node will be omitted. Note that setting this option to
1056# 1 or 2 may greatly reduce the computation time needed for large code bases. Also
1057# note that a graph may be further truncated if the graph's image dimensions are
1058# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT).
1059# If 0 is used for the depth value (the default), the graph is not depth-constrained.
1060
1061MAX_DOT_GRAPH_DEPTH    = 0
1062
1063# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1064# generate a legend page explaining the meaning of the various boxes and
1065# arrows in the dot generated graphs.
1066
1067GENERATE_LEGEND        = YES
1068
1069# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1070# remove the intermediate dot files that are used to generate
1071# the various graphs.
1072
1073DOT_CLEANUP            = YES
1074
1075#---------------------------------------------------------------------------
1076# Configuration::addtions related to the search engine   
1077#---------------------------------------------------------------------------
1078
1079# The SEARCHENGINE tag specifies whether or not a search engine should be
1080# used. If set to NO the values of all tags below this one will be ignored.
1081
1082SEARCHENGINE           = YES
Note: See TracBrowser for help on using the repository browser.