source: doc/devel.cfg @ fed9433

feature/autosinkfeature/cnnfeature/cnn_orgfeature/constantqfeature/crepefeature/crepe_orgfeature/pitchshiftfeature/pydocstringsfeature/timestretchfix/ffmpeg5pitchshiftsamplertimestretchyinfft+
Last change on this file since fed9433 was fed9433, checked in by Paul Brossier <piem@piem.org>, 16 years ago

doc/{user,devel}.cfg: update config to new doxygen, adapt to multiple directories

  • Property mode set to 100644
File size: 53.1 KB
Line 
1# Doxyfile 1.5.3-20071008
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8#       TAG = value [value, ...]
9# For lists items can also be appended using:
10#       TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# This tag specifies the encoding used for all characters in the config file that
18# follow. The default is UTF-8 which is also the encoding used for all text before
19# the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into
20# libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of
21# possible encodings.
22
23DOXYFILE_ENCODING      = UTF-8
24
25# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26# by quotes) that should identify the project.
27
28PROJECT_NAME           = aubio
29
30# The PROJECT_NUMBER tag can be used to enter a project or revision number.
31# This could be handy for archiving the generated documentation or
32# if some version control system is used.
33
34PROJECT_NUMBER         = 
35
36# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37# base path where the generated documentation will be put.
38# If a relative path is entered, it will be relative to the location
39# where doxygen was started. If left blank the current directory will be used.
40
41OUTPUT_DIRECTORY       = devel
42
43# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44# 4096 sub-directories (in 2 levels) under the output directory of each output
45# format and will distribute the generated files over these directories.
46# Enabling this option can be useful when feeding doxygen a huge amount of
47# source files, where putting all generated files in the same directory would
48# otherwise cause performance problems for the file system.
49
50CREATE_SUBDIRS         = NO
51
52# The OUTPUT_LANGUAGE tag is used to specify the language in which all
53# documentation generated by doxygen is written. Doxygen will use this
54# information to generate all constant output in the proper language.
55# The default language is English, other supported languages are:
56# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian,
58# Italian, Japanese, Japanese-en (Japanese with English messages), Korean,
59# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian,
60# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
61
62OUTPUT_LANGUAGE        = English
63
64# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
65# include brief member descriptions after the members that are listed in
66# the file and class documentation (similar to JavaDoc).
67# Set to NO to disable this.
68
69BRIEF_MEMBER_DESC      = YES
70
71# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
72# the brief description of a member or function before the detailed description.
73# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
74# brief descriptions will be completely suppressed.
75
76REPEAT_BRIEF           = YES
77
78# This tag implements a quasi-intelligent brief description abbreviator
79# that is used to form the text in various listings. Each string
80# in this list, if found as the leading text of the brief description, will be
81# stripped from the text and the result after processing the whole list, is
82# used as the annotated text. Otherwise, the brief description is used as-is.
83# If left blank, the following values are used ("$name" is automatically
84# replaced with the name of the entity): "The $name class" "The $name widget"
85# "The $name file" "is" "provides" "specifies" "contains"
86# "represents" "a" "an" "the"
87
88ABBREVIATE_BRIEF       = 
89
90# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
91# Doxygen will generate a detailed section even if there is only a brief
92# description.
93
94ALWAYS_DETAILED_SEC    = NO
95
96# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
97# inherited members of a class in the documentation of that class as if those
98# members were ordinary class members. Constructors, destructors and assignment
99# operators of the base classes will not be shown.
100
101INLINE_INHERITED_MEMB  = NO
102
103# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
104# path before files name in the file list and in the header files. If set
105# to NO the shortest path that makes the file name unique will be used.
106
107FULL_PATH_NAMES        = YES
108
109# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
110# can be used to strip a user-defined part of the path. Stripping is
111# only done if one of the specified strings matches the left-hand part of
112# the path. The tag can be used to show relative paths in the file list.
113# If left blank the directory from which doxygen is run is used as the
114# path to strip.
115
116STRIP_FROM_PATH        = ..
117
118# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
119# the path mentioned in the documentation of a class, which tells
120# the reader which header file to include in order to use a class.
121# If left blank only the name of the header file containing the class
122# definition is used. Otherwise one should specify the include paths that
123# are normally passed to the compiler using the -I flag.
124
125STRIP_FROM_INC_PATH    = 
126
127# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
128# (but less readable) file names. This can be useful is your file systems
129# doesn't support long names like on DOS, Mac, or CD-ROM.
130
131SHORT_NAMES            = NO
132
133# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
134# will interpret the first line (until the first dot) of a JavaDoc-style
135# comment as the brief description. If set to NO, the JavaDoc
136# comments will behave just like regular Qt-style comments
137# (thus requiring an explicit @brief command for a brief description.)
138
139JAVADOC_AUTOBRIEF      = YES
140
141# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
142# interpret the first line (until the first dot) of a Qt-style
143# comment as the brief description. If set to NO, the comments
144# will behave just like regular Qt-style comments (thus requiring
145# an explicit \brief command for a brief description.)
146
147QT_AUTOBRIEF           = NO
148
149# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
150# treat a multi-line C++ special comment block (i.e. a block of //! or ///
151# comments) as a brief description. This used to be the default behaviour.
152# The new default is to treat a multi-line C++ comment block as a detailed
153# description. Set this tag to YES if you prefer the old behaviour instead.
154
155MULTILINE_CPP_IS_BRIEF = NO
156
157# If the DETAILS_AT_TOP tag is set to YES then Doxygen
158# will output the detailed description near the top, like JavaDoc.
159# If set to NO, the detailed description appears after the member
160# documentation.
161
162DETAILS_AT_TOP         = NO
163
164# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
165# member inherits the documentation from any documented member that it
166# re-implements.
167
168INHERIT_DOCS           = YES
169
170# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
171# a new page for each member. If set to NO, the documentation of a member will
172# be part of the file/class/namespace that contains it.
173
174SEPARATE_MEMBER_PAGES  = NO
175
176# The TAB_SIZE tag can be used to set the number of spaces in a tab.
177# Doxygen uses this value to replace tabs by spaces in code fragments.
178
179TAB_SIZE               = 4
180
181# This tag can be used to specify a number of aliases that acts
182# as commands in the documentation. An alias has the form "name=value".
183# For example adding "sideeffect=\par Side Effects:\n" will allow you to
184# put the command \sideeffect (or @sideeffect) in the documentation, which
185# will result in a user-defined paragraph with heading "Side Effects:".
186# You can put \n's in the value part of an alias to insert newlines.
187
188ALIASES                = 
189
190# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
191# sources only. Doxygen will then generate output that is more tailored for C.
192# For instance, some of the names that are used will be different. The list
193# of all members will be omitted, etc.
194
195OPTIMIZE_OUTPUT_FOR_C  = YES
196
197# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
198# sources only. Doxygen will then generate output that is more tailored for Java.
199# For instance, namespaces will be presented as packages, qualified scopes
200# will look different, etc.
201
202OPTIMIZE_OUTPUT_JAVA   = NO
203
204# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
205# include (a tag file for) the STL sources as input, then you should
206# set this tag to YES in order to let doxygen match functions declarations and
207# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
208# func(std::string) {}). This also make the inheritance and collaboration
209# diagrams that involve STL classes more complete and accurate.
210
211BUILTIN_STL_SUPPORT    = NO
212
213# If you use Microsoft's C++/CLI language, you should set this option to YES to
214# enable parsing support.
215
216CPP_CLI_SUPPORT        = NO
217
218# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
219# Doxygen will parse them like normal C++ but will assume all classes use public
220# instead of private inheritance when no explicit protection keyword is present.
221
222SIP_SUPPORT            = NO
223
224# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
225# tag is set to YES, then doxygen will reuse the documentation of the first
226# member in the group (if any) for the other members of the group. By default
227# all members of a group must be documented explicitly.
228
229DISTRIBUTE_GROUP_DOC   = NO
230
231# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
232# the same type (for instance a group of public functions) to be put as a
233# subgroup of that type (e.g. under the Public Functions section). Set it to
234# NO to prevent subgrouping. Alternatively, this can be done per class using
235# the \nosubgrouping command.
236
237SUBGROUPING            = YES
238
239#---------------------------------------------------------------------------
240# Build related configuration options
241#---------------------------------------------------------------------------
242
243# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
244# documentation are documented, even if no documentation was available.
245# Private class members and static file members will be hidden unless
246# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
247
248EXTRACT_ALL            = YES
249
250# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
251# will be included in the documentation.
252
253EXTRACT_PRIVATE        = YES
254
255# If the EXTRACT_STATIC tag is set to YES all static members of a file
256# will be included in the documentation.
257
258EXTRACT_STATIC         = YES
259
260# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
261# defined locally in source files will be included in the documentation.
262# If set to NO only classes defined in header files are included.
263
264EXTRACT_LOCAL_CLASSES  = YES
265
266# This flag is only useful for Objective-C code. When set to YES local
267# methods, which are defined in the implementation section but not in
268# the interface are included in the documentation.
269# If set to NO (the default) only methods in the interface are included.
270
271EXTRACT_LOCAL_METHODS  = NO
272
273# If this flag is set to YES, the members of anonymous namespaces will be extracted
274# and appear in the documentation as a namespace called 'anonymous_namespace{file}',
275# where file will be replaced with the base name of the file that contains the anonymous
276# namespace. By default anonymous namespace are hidden.
277
278EXTRACT_ANON_NSPACES   = NO
279
280# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
281# undocumented members of documented classes, files or namespaces.
282# If set to NO (the default) these members will be included in the
283# various overviews, but no documentation section is generated.
284# This option has no effect if EXTRACT_ALL is enabled.
285
286HIDE_UNDOC_MEMBERS     = NO
287
288# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
289# undocumented classes that are normally visible in the class hierarchy.
290# If set to NO (the default) these classes will be included in the various
291# overviews. This option has no effect if EXTRACT_ALL is enabled.
292
293HIDE_UNDOC_CLASSES     = NO
294
295# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
296# friend (class|struct|union) declarations.
297# If set to NO (the default) these declarations will be included in the
298# documentation.
299
300HIDE_FRIEND_COMPOUNDS  = NO
301
302# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
303# documentation blocks found inside the body of a function.
304# If set to NO (the default) these blocks will be appended to the
305# function's detailed documentation block.
306
307HIDE_IN_BODY_DOCS      = NO
308
309# The INTERNAL_DOCS tag determines if documentation
310# that is typed after a \internal command is included. If the tag is set
311# to NO (the default) then the documentation will be excluded.
312# Set it to YES to include the internal documentation.
313
314INTERNAL_DOCS          = NO
315
316# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
317# file names in lower-case letters. If set to YES upper-case letters are also
318# allowed. This is useful if you have classes or files whose names only differ
319# in case and if your file system supports case sensitive file names. Windows
320# and Mac users are advised to set this option to NO.
321
322CASE_SENSE_NAMES       = YES
323
324# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
325# will show members with their full class and namespace scopes in the
326# documentation. If set to YES the scope will be hidden.
327
328HIDE_SCOPE_NAMES       = NO
329
330# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
331# will put a list of the files that are included by a file in the documentation
332# of that file.
333
334SHOW_INCLUDE_FILES     = YES
335
336# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
337# is inserted in the documentation for inline members.
338
339INLINE_INFO            = YES
340
341# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
342# will sort the (detailed) documentation of file and class members
343# alphabetically by member name. If set to NO the members will appear in
344# declaration order.
345
346SORT_MEMBER_DOCS       = YES
347
348# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
349# brief documentation of file, namespace and class members alphabetically
350# by member name. If set to NO (the default) the members will appear in
351# declaration order.
352
353SORT_BRIEF_DOCS        = NO
354
355# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
356# sorted by fully-qualified names, including namespaces. If set to
357# NO (the default), the class list will be sorted only by class name,
358# not including the namespace part.
359# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
360# Note: This option applies only to the class list, not to the
361# alphabetical list.
362
363SORT_BY_SCOPE_NAME     = NO
364
365# The GENERATE_TODOLIST tag can be used to enable (YES) or
366# disable (NO) the todo list. This list is created by putting \todo
367# commands in the documentation.
368
369GENERATE_TODOLIST      = YES
370
371# The GENERATE_TESTLIST tag can be used to enable (YES) or
372# disable (NO) the test list. This list is created by putting \test
373# commands in the documentation.
374
375GENERATE_TESTLIST      = YES
376
377# The GENERATE_BUGLIST tag can be used to enable (YES) or
378# disable (NO) the bug list. This list is created by putting \bug
379# commands in the documentation.
380
381GENERATE_BUGLIST       = YES
382
383# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
384# disable (NO) the deprecated list. This list is created by putting
385# \deprecated commands in the documentation.
386
387GENERATE_DEPRECATEDLIST= YES
388
389# The ENABLED_SECTIONS tag can be used to enable conditional
390# documentation sections, marked by \if sectionname ... \endif.
391
392ENABLED_SECTIONS       = 
393
394# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
395# the initial value of a variable or define consists of for it to appear in
396# the documentation. If the initializer consists of more lines than specified
397# here it will be hidden. Use a value of 0 to hide initializers completely.
398# The appearance of the initializer of individual variables and defines in the
399# documentation can be controlled using \showinitializer or \hideinitializer
400# command in the documentation regardless of this setting.
401
402MAX_INITIALIZER_LINES  = 30
403
404# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
405# at the bottom of the documentation of classes and structs. If set to YES the
406# list will mention the files that were used to generate the documentation.
407
408SHOW_USED_FILES        = YES
409
410# If the sources in your project are distributed over multiple directories
411# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
412# in the documentation. The default is NO.
413
414SHOW_DIRECTORIES       = YES
415
416# The FILE_VERSION_FILTER tag can be used to specify a program or script that
417# doxygen should invoke to get the current version for each file (typically from the
418# version control system). Doxygen will invoke the program by executing (via
419# popen()) the command <command> <input-file>, where <command> is the value of
420# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
421# provided by doxygen. Whatever the program writes to standard output
422# is used as the file version. See the manual for examples.
423
424FILE_VERSION_FILTER    = 
425
426#---------------------------------------------------------------------------
427# configuration options related to warning and progress messages
428#---------------------------------------------------------------------------
429
430# The QUIET tag can be used to turn on/off the messages that are generated
431# by doxygen. Possible values are YES and NO. If left blank NO is used.
432
433QUIET                  = NO
434
435# The WARNINGS tag can be used to turn on/off the warning messages that are
436# generated by doxygen. Possible values are YES and NO. If left blank
437# NO is used.
438
439WARNINGS               = YES
440
441# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
442# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
443# automatically be disabled.
444
445WARN_IF_UNDOCUMENTED   = YES
446
447# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
448# potential errors in the documentation, such as not documenting some
449# parameters in a documented function, or documenting parameters that
450# don't exist or using markup commands wrongly.
451
452WARN_IF_DOC_ERROR      = YES
453
454# This WARN_NO_PARAMDOC option can be abled to get warnings for
455# functions that are documented, but have no documentation for their parameters
456# or return value. If set to NO (the default) doxygen will only warn about
457# wrong or incomplete parameter documentation, but not about the absence of
458# documentation.
459
460WARN_NO_PARAMDOC       = NO
461
462# The WARN_FORMAT tag determines the format of the warning messages that
463# doxygen can produce. The string should contain the $file, $line, and $text
464# tags, which will be replaced by the file and line number from which the
465# warning originated and the warning text. Optionally the format may contain
466# $version, which will be replaced by the version of the file (if it could
467# be obtained via FILE_VERSION_FILTER)
468
469WARN_FORMAT            = "$file:$line: $text "
470
471# The WARN_LOGFILE tag can be used to specify a file to which warning
472# and error messages should be written. If left blank the output is written
473# to stderr.
474
475WARN_LOGFILE           = 
476
477#---------------------------------------------------------------------------
478# configuration options related to the input files
479#---------------------------------------------------------------------------
480
481# The INPUT tag can be used to specify the files and/or directories that contain
482# documented source files. You may enter file names like "myfile.cpp" or
483# directories like "/usr/src/myproject". Separate the files or directories
484# with spaces.
485
486INPUT                  = ../src ../ext
487
488# This tag can be used to specify the character encoding of the source files that
489# doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default
490# input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding.
491# See http://www.gnu.org/software/libiconv for the list of possible encodings.
492
493INPUT_ENCODING         = UTF-8
494
495# If the value of the INPUT tag contains directories, you can use the
496# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
497# and *.h) to filter out the source-files in the directories. If left
498# blank the following patterns are tested:
499# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
500# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
501
502FILE_PATTERNS          = 
503
504# The RECURSIVE tag can be used to turn specify whether or not subdirectories
505# should be searched for input files as well. Possible values are YES and NO.
506# If left blank NO is used.
507
508RECURSIVE              = YES
509
510# The EXCLUDE tag can be used to specify files and/or directories that should
511# excluded from the INPUT source files. This way you can easily exclude a
512# subdirectory from a directory tree whose root is specified with the INPUT tag.
513
514EXCLUDE                = 
515
516# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
517# directories that are symbolic links (a Unix filesystem feature) are excluded
518# from the input.
519
520EXCLUDE_SYMLINKS       = NO
521
522# If the value of the INPUT tag contains directories, you can use the
523# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
524# certain files from those directories. Note that the wildcards are matched
525# against the file with absolute path, so to exclude all test directories
526# for example use the pattern */test/*
527
528EXCLUDE_PATTERNS       = 
529
530# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
531# (namespaces, classes, functions, etc.) that should be excluded from the output.
532# The symbol name can be a fully qualified name, a word, or if the wildcard * is used,
533# a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test
534
535EXCLUDE_SYMBOLS        = 
536
537# The EXAMPLE_PATH tag can be used to specify one or more files or
538# directories that contain example code fragments that are included (see
539# the \include command).
540
541EXAMPLE_PATH           = ../examples \
542                         ../
543
544# If the value of the EXAMPLE_PATH tag contains directories, you can use the
545# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
546# and *.h) to filter out the source-files in the directories. If left
547# blank all files are included.
548
549EXAMPLE_PATTERNS       = 
550
551# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
552# searched for input files to be used with the \include or \dontinclude
553# commands irrespective of the value of the RECURSIVE tag.
554# Possible values are YES and NO. If left blank NO is used.
555
556EXAMPLE_RECURSIVE      = NO
557
558# The IMAGE_PATH tag can be used to specify one or more files or
559# directories that contain image that are included in the documentation (see
560# the \image command).
561
562IMAGE_PATH             = 
563
564# The INPUT_FILTER tag can be used to specify a program that doxygen should
565# invoke to filter for each input file. Doxygen will invoke the filter program
566# by executing (via popen()) the command <filter> <input-file>, where <filter>
567# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
568# input file. Doxygen will then use the output that the filter program writes
569# to standard output.  If FILTER_PATTERNS is specified, this tag will be
570# ignored.
571
572INPUT_FILTER           = 
573
574# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
575# basis.  Doxygen will compare the file name with each pattern and apply the
576# filter if there is a match.  The filters are a list of the form:
577# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
578# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
579# is applied to all files.
580
581FILTER_PATTERNS        = 
582
583# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
584# INPUT_FILTER) will be used to filter the input files when producing source
585# files to browse (i.e. when SOURCE_BROWSER is set to YES).
586
587FILTER_SOURCE_FILES    = NO
588
589#---------------------------------------------------------------------------
590# configuration options related to source browsing
591#---------------------------------------------------------------------------
592
593# If the SOURCE_BROWSER tag is set to YES then a list of source files will
594# be generated. Documented entities will be cross-referenced with these sources.
595# Note: To get rid of all source code in the generated output, make sure also
596# VERBATIM_HEADERS is set to NO. If you have enabled CALL_GRAPH or CALLER_GRAPH
597# then you must also enable this option. If you don't then doxygen will produce
598# a warning and turn it on anyway
599
600SOURCE_BROWSER         = YES
601
602# Setting the INLINE_SOURCES tag to YES will include the body
603# of functions and classes directly in the documentation.
604
605INLINE_SOURCES         = NO
606
607# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
608# doxygen to hide any special comment blocks from generated source code
609# fragments. Normal C and C++ comments will always remain visible.
610
611STRIP_CODE_COMMENTS    = YES
612
613# If the REFERENCED_BY_RELATION tag is set to YES (the default)
614# then for each documented function all documented
615# functions referencing it will be listed.
616
617REFERENCED_BY_RELATION = YES
618
619# If the REFERENCES_RELATION tag is set to YES (the default)
620# then for each documented function all documented entities
621# called/used by that function will be listed.
622
623REFERENCES_RELATION    = YES
624
625# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
626# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
627# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
628# link to the source code.  Otherwise they will link to the documentstion.
629
630REFERENCES_LINK_SOURCE = YES
631
632# If the USE_HTAGS tag is set to YES then the references to source code
633# will point to the HTML generated by the htags(1) tool instead of doxygen
634# built-in source browser. The htags tool is part of GNU's global source
635# tagging system (see http://www.gnu.org/software/global/global.html). You
636# will need version 4.8.6 or higher.
637
638USE_HTAGS              = NO
639
640# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
641# will generate a verbatim copy of the header file for each class for
642# which an include is specified. Set to NO to disable this.
643
644VERBATIM_HEADERS       = YES
645
646#---------------------------------------------------------------------------
647# configuration options related to the alphabetical class index
648#---------------------------------------------------------------------------
649
650# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
651# of all compounds will be generated. Enable this if the project
652# contains a lot of classes, structs, unions or interfaces.
653
654ALPHABETICAL_INDEX     = NO
655
656# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
657# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
658# in which this list will be split (can be a number in the range [1..20])
659
660COLS_IN_ALPHA_INDEX    = 5
661
662# In case all classes in a project start with a common prefix, all
663# classes will be put under the same header in the alphabetical index.
664# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
665# should be ignored while generating the index headers.
666
667IGNORE_PREFIX          = 
668
669#---------------------------------------------------------------------------
670# configuration options related to the HTML output
671#---------------------------------------------------------------------------
672
673# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
674# generate HTML output.
675
676GENERATE_HTML          = YES
677
678# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
679# If a relative path is entered the value of OUTPUT_DIRECTORY will be
680# put in front of it. If left blank `html' will be used as the default path.
681
682HTML_OUTPUT            = html
683
684# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
685# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
686# doxygen will generate files with .html extension.
687
688HTML_FILE_EXTENSION    = .html
689
690# The HTML_HEADER tag can be used to specify a personal HTML header for
691# each generated HTML page. If it is left blank doxygen will generate a
692# standard header.
693
694HTML_HEADER            = 
695
696# The HTML_FOOTER tag can be used to specify a personal HTML footer for
697# each generated HTML page. If it is left blank doxygen will generate a
698# standard footer.
699
700HTML_FOOTER            = 
701
702# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
703# style sheet that is used by each HTML page. It can be used to
704# fine-tune the look of the HTML output. If the tag is left blank doxygen
705# will generate a default style sheet. Note that doxygen will try to copy
706# the style sheet file to the HTML output directory, so don't put your own
707# stylesheet in the HTML output directory as well, or it will be erased!
708
709HTML_STYLESHEET        = aubio.css
710
711# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
712# files or namespaces will be aligned in HTML using tables. If set to
713# NO a bullet list will be used.
714
715HTML_ALIGN_MEMBERS     = YES
716
717# If the GENERATE_HTMLHELP tag is set to YES, additional index files
718# will be generated that can be used as input for tools like the
719# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
720# of the generated HTML documentation.
721
722GENERATE_HTMLHELP      = NO
723
724# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
725# documentation will contain sections that can be hidden and shown after the
726# page has loaded. For this to work a browser that supports
727# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
728# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
729
730HTML_DYNAMIC_SECTIONS  = NO
731
732# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
733# be used to specify the file name of the resulting .chm file. You
734# can add a path in front of the file if the result should not be
735# written to the html output directory.
736
737CHM_FILE               = 
738
739# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
740# be used to specify the location (absolute path including file name) of
741# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
742# the HTML help compiler on the generated index.hhp.
743
744HHC_LOCATION           = 
745
746# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
747# controls if a separate .chi index file is generated (YES) or that
748# it should be included in the master .chm file (NO).
749
750GENERATE_CHI           = NO
751
752# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
753# controls whether a binary table of contents is generated (YES) or a
754# normal table of contents (NO) in the .chm file.
755
756BINARY_TOC             = NO
757
758# The TOC_EXPAND flag can be set to YES to add extra items for group members
759# to the contents of the HTML help documentation and to the tree view.
760
761TOC_EXPAND             = NO
762
763# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
764# top of each HTML page. The value NO (the default) enables the index and
765# the value YES disables it.
766
767DISABLE_INDEX          = NO
768
769# This tag can be used to set the number of enum values (range [1..20])
770# that doxygen will group on one line in the generated HTML documentation.
771
772ENUM_VALUES_PER_LINE   = 4
773
774# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
775# generated containing a tree-like index structure (just like the one that
776# is generated for HTML Help). For this to work a browser that supports
777# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
778# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
779# probably better off using the HTML help feature.
780
781GENERATE_TREEVIEW      = NO
782
783# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
784# used to set the initial width (in pixels) of the frame in which the tree
785# is shown.
786
787TREEVIEW_WIDTH         = 250
788
789#---------------------------------------------------------------------------
790# configuration options related to the LaTeX output
791#---------------------------------------------------------------------------
792
793# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
794# generate Latex output.
795
796GENERATE_LATEX         = NO
797
798# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
799# If a relative path is entered the value of OUTPUT_DIRECTORY will be
800# put in front of it. If left blank `latex' will be used as the default path.
801
802LATEX_OUTPUT           = latex
803
804# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
805# invoked. If left blank `latex' will be used as the default command name.
806
807LATEX_CMD_NAME         = latex
808
809# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
810# generate index for LaTeX. If left blank `makeindex' will be used as the
811# default command name.
812
813MAKEINDEX_CMD_NAME     = makeindex
814
815# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
816# LaTeX documents. This may be useful for small projects and may help to
817# save some trees in general.
818
819COMPACT_LATEX          = NO
820
821# The PAPER_TYPE tag can be used to set the paper type that is used
822# by the printer. Possible values are: a4, a4wide, letter, legal and
823# executive. If left blank a4wide will be used.
824
825PAPER_TYPE             = a4wide
826
827# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
828# packages that should be included in the LaTeX output.
829
830EXTRA_PACKAGES         = 
831
832# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
833# the generated latex document. The header should contain everything until
834# the first chapter. If it is left blank doxygen will generate a
835# standard header. Notice: only use this tag if you know what you are doing!
836
837LATEX_HEADER           = 
838
839# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
840# is prepared for conversion to pdf (using ps2pdf). The pdf file will
841# contain links (just like the HTML output) instead of page references
842# This makes the output suitable for online browsing using a pdf viewer.
843
844PDF_HYPERLINKS         = NO
845
846# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
847# plain latex in the generated Makefile. Set this option to YES to get a
848# higher quality PDF documentation.
849
850USE_PDFLATEX           = NO
851
852# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
853# command to the generated LaTeX files. This will instruct LaTeX to keep
854# running if errors occur, instead of asking the user for help.
855# This option is also used when generating formulas in HTML.
856
857LATEX_BATCHMODE        = NO
858
859# If LATEX_HIDE_INDICES is set to YES then doxygen will not
860# include the index chapters (such as File Index, Compound Index, etc.)
861# in the output.
862
863LATEX_HIDE_INDICES     = NO
864
865#---------------------------------------------------------------------------
866# configuration options related to the RTF output
867#---------------------------------------------------------------------------
868
869# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
870# The RTF output is optimized for Word 97 and may not look very pretty with
871# other RTF readers or editors.
872
873GENERATE_RTF           = NO
874
875# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
876# If a relative path is entered the value of OUTPUT_DIRECTORY will be
877# put in front of it. If left blank `rtf' will be used as the default path.
878
879RTF_OUTPUT             = rtf
880
881# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
882# RTF documents. This may be useful for small projects and may help to
883# save some trees in general.
884
885COMPACT_RTF            = NO
886
887# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
888# will contain hyperlink fields. The RTF file will
889# contain links (just like the HTML output) instead of page references.
890# This makes the output suitable for online browsing using WORD or other
891# programs which support those fields.
892# Note: wordpad (write) and others do not support links.
893
894RTF_HYPERLINKS         = NO
895
896# Load stylesheet definitions from file. Syntax is similar to doxygen's
897# config file, i.e. a series of assignments. You only have to provide
898# replacements, missing definitions are set to their default value.
899
900RTF_STYLESHEET_FILE    = 
901
902# Set optional variables used in the generation of an rtf document.
903# Syntax is similar to doxygen's config file.
904
905RTF_EXTENSIONS_FILE    = 
906
907#---------------------------------------------------------------------------
908# configuration options related to the man page output
909#---------------------------------------------------------------------------
910
911# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
912# generate man pages
913
914GENERATE_MAN           = NO
915
916# The MAN_OUTPUT tag is used to specify where the man pages will be put.
917# If a relative path is entered the value of OUTPUT_DIRECTORY will be
918# put in front of it. If left blank `man' will be used as the default path.
919
920MAN_OUTPUT             = man
921
922# The MAN_EXTENSION tag determines the extension that is added to
923# the generated man pages (default is the subroutine's section .3)
924
925MAN_EXTENSION          = .3
926
927# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
928# then it will generate one additional man file for each entity
929# documented in the real man page(s). These additional files
930# only source the real man page, but without them the man command
931# would be unable to find the correct page. The default is NO.
932
933MAN_LINKS              = NO
934
935#---------------------------------------------------------------------------
936# configuration options related to the XML output
937#---------------------------------------------------------------------------
938
939# If the GENERATE_XML tag is set to YES Doxygen will
940# generate an XML file that captures the structure of
941# the code including all documentation.
942
943GENERATE_XML           = NO
944
945# The XML_OUTPUT tag is used to specify where the XML pages will be put.
946# If a relative path is entered the value of OUTPUT_DIRECTORY will be
947# put in front of it. If left blank `xml' will be used as the default path.
948
949XML_OUTPUT             = xml
950
951# The XML_SCHEMA tag can be used to specify an XML schema,
952# which can be used by a validating XML parser to check the
953# syntax of the XML files.
954
955XML_SCHEMA             = 
956
957# The XML_DTD tag can be used to specify an XML DTD,
958# which can be used by a validating XML parser to check the
959# syntax of the XML files.
960
961XML_DTD                = 
962
963# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
964# dump the program listings (including syntax highlighting
965# and cross-referencing information) to the XML output. Note that
966# enabling this will significantly increase the size of the XML output.
967
968XML_PROGRAMLISTING     = YES
969
970#---------------------------------------------------------------------------
971# configuration options for the AutoGen Definitions output
972#---------------------------------------------------------------------------
973
974# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
975# generate an AutoGen Definitions (see autogen.sf.net) file
976# that captures the structure of the code including all
977# documentation. Note that this feature is still experimental
978# and incomplete at the moment.
979
980GENERATE_AUTOGEN_DEF   = NO
981
982#---------------------------------------------------------------------------
983# configuration options related to the Perl module output
984#---------------------------------------------------------------------------
985
986# If the GENERATE_PERLMOD tag is set to YES Doxygen will
987# generate a Perl module file that captures the structure of
988# the code including all documentation. Note that this
989# feature is still experimental and incomplete at the
990# moment.
991
992GENERATE_PERLMOD       = NO
993
994# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
995# the necessary Makefile rules, Perl scripts and LaTeX code to be able
996# to generate PDF and DVI output from the Perl module output.
997
998PERLMOD_LATEX          = NO
999
1000# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1001# nicely formatted so it can be parsed by a human reader.  This is useful
1002# if you want to understand what is going on.  On the other hand, if this
1003# tag is set to NO the size of the Perl module output will be much smaller
1004# and Perl will parse it just the same.
1005
1006PERLMOD_PRETTY         = YES
1007
1008# The names of the make variables in the generated doxyrules.make file
1009# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1010# This is useful so different doxyrules.make files included by the same
1011# Makefile don't overwrite each other's variables.
1012
1013PERLMOD_MAKEVAR_PREFIX = 
1014
1015#---------------------------------------------------------------------------
1016# Configuration options related to the preprocessor   
1017#---------------------------------------------------------------------------
1018
1019# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1020# evaluate all C-preprocessor directives found in the sources and include
1021# files.
1022
1023ENABLE_PREPROCESSING   = YES
1024
1025# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1026# names in the source code. If set to NO (the default) only conditional
1027# compilation will be performed. Macro expansion can be done in a controlled
1028# way by setting EXPAND_ONLY_PREDEF to YES.
1029
1030MACRO_EXPANSION        = NO
1031
1032# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1033# then the macro expansion is limited to the macros specified with the
1034# PREDEFINED and EXPAND_AS_DEFINED tags.
1035
1036EXPAND_ONLY_PREDEF     = NO
1037
1038# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1039# in the INCLUDE_PATH (see below) will be search if a #include is found.
1040
1041SEARCH_INCLUDES        = YES
1042
1043# The INCLUDE_PATH tag can be used to specify one or more directories that
1044# contain include files that are not input files but should be processed by
1045# the preprocessor.
1046
1047INCLUDE_PATH           = 
1048
1049# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1050# patterns (like *.h and *.hpp) to filter out the header-files in the
1051# directories. If left blank, the patterns specified with FILE_PATTERNS will
1052# be used.
1053
1054INCLUDE_FILE_PATTERNS  = 
1055
1056# The PREDEFINED tag can be used to specify one or more macro names that
1057# are defined before the preprocessor is started (similar to the -D option of
1058# gcc). The argument of the tag is a list of macros of the form: name
1059# or name=definition (no spaces). If the definition and the = are
1060# omitted =1 is assumed. To prevent a macro definition from being
1061# undefined via #undef or recursively expanded use the := operator
1062# instead of the = operator.
1063
1064PREDEFINED             = 
1065
1066# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1067# this tag can be used to specify a list of macro names that should be expanded.
1068# The macro definition that is found in the sources will be used.
1069# Use the PREDEFINED tag if you want to use a different macro definition.
1070
1071EXPAND_AS_DEFINED      = 
1072
1073# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1074# doxygen's preprocessor will remove all function-like macros that are alone
1075# on a line, have an all uppercase name, and do not end with a semicolon. Such
1076# function macros are typically used for boiler-plate code, and will confuse
1077# the parser if not removed.
1078
1079SKIP_FUNCTION_MACROS   = YES
1080
1081#---------------------------------------------------------------------------
1082# Configuration::additions related to external references   
1083#---------------------------------------------------------------------------
1084
1085# The TAGFILES option can be used to specify one or more tagfiles.
1086# Optionally an initial location of the external documentation
1087# can be added for each tagfile. The format of a tag file without
1088# this location is as follows:
1089#   TAGFILES = file1 file2 ...
1090# Adding location for the tag files is done as follows:
1091#   TAGFILES = file1=loc1 "file2 = loc2" ...
1092# where "loc1" and "loc2" can be relative or absolute paths or
1093# URLs. If a location is present for each tag, the installdox tool
1094# does not have to be run to correct the links.
1095# Note that each tag file must have a unique name
1096# (where the name does NOT include the path)
1097# If a tag file is not located in the directory in which doxygen
1098# is run, you must also specify the path to the tagfile here.
1099
1100TAGFILES               = 
1101
1102# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1103# a tag file that is based on the input files it reads.
1104
1105GENERATE_TAGFILE       = 
1106
1107# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1108# in the class index. If set to NO only the inherited external classes
1109# will be listed.
1110
1111ALLEXTERNALS           = NO
1112
1113# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1114# in the modules index. If set to NO, only the current project's groups will
1115# be listed.
1116
1117EXTERNAL_GROUPS        = YES
1118
1119# The PERL_PATH should be the absolute path and name of the perl script
1120# interpreter (i.e. the result of `which perl').
1121
1122PERL_PATH              = /usr/bin/perl
1123
1124#---------------------------------------------------------------------------
1125# Configuration options related to the dot tool   
1126#---------------------------------------------------------------------------
1127
1128# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1129# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1130# or super classes. Setting the tag to NO turns the diagrams off. Note that
1131# this option is superseded by the HAVE_DOT option below. This is only a
1132# fallback. It is recommended to install and use dot, since it yields more
1133# powerful graphs.
1134
1135CLASS_DIAGRAMS         = YES
1136
1137# You can define message sequence charts within doxygen comments using the \msc
1138# command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to
1139# produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to
1140# specify the directory where the mscgen tool resides. If left empty the tool is assumed to
1141# be found in the default search path.
1142
1143MSCGEN_PATH            = 
1144
1145# If set to YES, the inheritance and collaboration graphs will hide
1146# inheritance and usage relations if the target is undocumented
1147# or is not a class.
1148
1149HIDE_UNDOC_RELATIONS   = NO
1150
1151# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1152# available from the path. This tool is part of Graphviz, a graph visualization
1153# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1154# have no effect if this option is set to NO (the default)
1155
1156HAVE_DOT               = YES
1157
1158# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1159# will generate a graph for each documented class showing the direct and
1160# indirect inheritance relations. Setting this tag to YES will force the
1161# the CLASS_DIAGRAMS tag to NO.
1162
1163CLASS_GRAPH            = YES
1164
1165# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1166# will generate a graph for each documented class showing the direct and
1167# indirect implementation dependencies (inheritance, containment, and
1168# class references variables) of the class with other documented classes.
1169
1170COLLABORATION_GRAPH    = YES
1171
1172# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1173# will generate a graph for groups, showing the direct groups dependencies
1174
1175GROUP_GRAPHS           = YES
1176
1177# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1178# collaboration diagrams in a style similar to the OMG's Unified Modeling
1179# Language.
1180
1181UML_LOOK               = NO
1182
1183# If set to YES, the inheritance and collaboration graphs will show the
1184# relations between templates and their instances.
1185
1186TEMPLATE_RELATIONS     = NO
1187
1188# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1189# tags are set to YES then doxygen will generate a graph for each documented
1190# file showing the direct and indirect include dependencies of the file with
1191# other documented files.
1192
1193INCLUDE_GRAPH          = YES
1194
1195# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1196# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1197# documented header file showing the documented files that directly or
1198# indirectly include this file.
1199
1200INCLUDED_BY_GRAPH      = YES
1201
1202# If the CALL_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will
1203# generate a call dependency graph for every global function or class method.
1204# Note that enabling this option will significantly increase the time of a run.
1205# So in most cases it will be better to enable call graphs for selected
1206# functions only using the \callgraph command.
1207
1208CALL_GRAPH             = NO
1209
1210# If the CALLER_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will
1211# generate a caller dependency graph for every global function or class method.
1212# Note that enabling this option will significantly increase the time of a run.
1213# So in most cases it will be better to enable caller graphs for selected
1214# functions only using the \callergraph command.
1215
1216CALLER_GRAPH           = NO
1217
1218# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1219# will graphical hierarchy of all classes instead of a textual one.
1220
1221GRAPHICAL_HIERARCHY    = YES
1222
1223# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1224# then doxygen will show the dependencies a directory has on other directories
1225# in a graphical way. The dependency relations are determined by the #include
1226# relations between the files in the directories.
1227
1228DIRECTORY_GRAPH        = YES
1229
1230# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1231# generated by dot. Possible values are png, jpg, or gif
1232# If left blank png will be used.
1233
1234DOT_IMAGE_FORMAT       = png
1235
1236# The tag DOT_PATH can be used to specify the path where the dot tool can be
1237# found. If left blank, it is assumed the dot tool can be found in the path.
1238
1239DOT_PATH               = 
1240
1241# The DOTFILE_DIRS tag can be used to specify one or more directories that
1242# contain dot files that are included in the documentation (see the
1243# \dotfile command).
1244
1245DOTFILE_DIRS           = 
1246
1247# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1248# nodes that will be shown in the graph. If the number of nodes in a graph
1249# becomes larger than this value, doxygen will truncate the graph, which is
1250# visualized by representing a node as a red box. Note that doxygen if the number
1251# of direct children of the root node in a graph is already larger than
1252# MAX_DOT_GRAPH_NOTES then the graph will not be shown at all. Also note
1253# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1254
1255DOT_GRAPH_MAX_NODES    = 50
1256
1257# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1258# graphs generated by dot. A depth value of 3 means that only nodes reachable
1259# from the root by following a path via at most 3 edges will be shown. Nodes
1260# that lay further from the root node will be omitted. Note that setting this
1261# option to 1 or 2 may greatly reduce the computation time needed for large
1262# code bases. Also note that the size of a graph can be further restricted by
1263# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1264
1265MAX_DOT_GRAPH_DEPTH    = 0
1266
1267# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1268# background. This is disabled by default, which results in a white background.
1269# Warning: Depending on the platform used, enabling this option may lead to
1270# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
1271# read).
1272
1273DOT_TRANSPARENT        = NO
1274
1275# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1276# files in one run (i.e. multiple -o and -T options on the command line). This
1277# makes dot run faster, but since only newer versions of dot (>1.8.10)
1278# support this, this feature is disabled by default.
1279
1280DOT_MULTI_TARGETS      = NO
1281
1282# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1283# generate a legend page explaining the meaning of the various boxes and
1284# arrows in the dot generated graphs.
1285
1286GENERATE_LEGEND        = YES
1287
1288# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1289# remove the intermediate dot files that are used to generate
1290# the various graphs.
1291
1292DOT_CLEANUP            = YES
1293
1294#---------------------------------------------------------------------------
1295# Configuration::additions related to the search engine   
1296#---------------------------------------------------------------------------
1297
1298# The SEARCHENGINE tag specifies whether or not a search engine should be
1299# used. If set to NO the values of all tags below this one will be ignored.
1300
1301SEARCHENGINE           = YES
Note: See TracBrowser for help on using the repository browser.