source: doc/user.cfg @ 8b8336b

feature/autosinkfeature/cnnfeature/cnn_orgfeature/constantqfeature/crepefeature/crepe_orgfeature/pitchshiftfeature/pydocstringsfeature/timestretchfix/ffmpeg5pitchshiftsamplertimestretchyinfft+
Last change on this file since 8b8336b was 8b8336b, checked in by Paul Brossier <piem@piem.org>, 14 years ago

doc/user.cfg: sync with aubio.h

  • Property mode set to 100644
File size: 62.7 KB
Line 
1# Doxyfile 1.6.1
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8#       TAG = value [value, ...]
9# For lists items can also be appended using:
10#       TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# This tag specifies the encoding used for all characters in the config file
18# that follow. The default is UTF-8 which is also the encoding used for all
19# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20# iconv built into libc) for the transcoding. See
21# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23DOXYFILE_ENCODING      = UTF-8
24
25# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26# by quotes) that should identify the project.
27
28PROJECT_NAME           = aubio
29
30# The PROJECT_NUMBER tag can be used to enter a project or revision number.
31# This could be handy for archiving the generated documentation or
32# if some version control system is used.
33
34PROJECT_NUMBER         = "version 0.4.0"
35
36# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37# base path where the generated documentation will be put.
38# If a relative path is entered, it will be relative to the location
39# where doxygen was started. If left blank the current directory will be used.
40
41OUTPUT_DIRECTORY       = user
42
43# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44# 4096 sub-directories (in 2 levels) under the output directory of each output
45# format and will distribute the generated files over these directories.
46# Enabling this option can be useful when feeding doxygen a huge amount of
47# source files, where putting all generated files in the same directory would
48# otherwise cause performance problems for the file system.
49
50CREATE_SUBDIRS         = NO
51
52# The OUTPUT_LANGUAGE tag is used to specify the language in which all
53# documentation generated by doxygen is written. Doxygen will use this
54# information to generate all constant output in the proper language.
55# The default language is English, other supported languages are:
56# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
58# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
59# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
60# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
61# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
62
63OUTPUT_LANGUAGE        = English
64
65# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
66# include brief member descriptions after the members that are listed in
67# the file and class documentation (similar to JavaDoc).
68# Set to NO to disable this.
69
70BRIEF_MEMBER_DESC      = YES
71
72# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
73# the brief description of a member or function before the detailed description.
74# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
75# brief descriptions will be completely suppressed.
76
77REPEAT_BRIEF           = YES
78
79# This tag implements a quasi-intelligent brief description abbreviator
80# that is used to form the text in various listings. Each string
81# in this list, if found as the leading text of the brief description, will be
82# stripped from the text and the result after processing the whole list, is
83# used as the annotated text. Otherwise, the brief description is used as-is.
84# If left blank, the following values are used ("$name" is automatically
85# replaced with the name of the entity): "The $name class" "The $name widget"
86# "The $name file" "is" "provides" "specifies" "contains"
87# "represents" "a" "an" "the"
88
89ABBREVIATE_BRIEF       =
90
91# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
92# Doxygen will generate a detailed section even if there is only a brief
93# description.
94
95ALWAYS_DETAILED_SEC    = NO
96
97# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
98# inherited members of a class in the documentation of that class as if those
99# members were ordinary class members. Constructors, destructors and assignment
100# operators of the base classes will not be shown.
101
102INLINE_INHERITED_MEMB  = NO
103
104# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
105# path before files name in the file list and in the header files. If set
106# to NO the shortest path that makes the file name unique will be used.
107
108FULL_PATH_NAMES        = YES
109
110# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
111# can be used to strip a user-defined part of the path. Stripping is
112# only done if one of the specified strings matches the left-hand part of
113# the path. The tag can be used to show relative paths in the file list.
114# If left blank the directory from which doxygen is run is used as the
115# path to strip.
116
117STRIP_FROM_PATH        = ../src
118
119# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
120# the path mentioned in the documentation of a class, which tells
121# the reader which header file to include in order to use a class.
122# If left blank only the name of the header file containing the class
123# definition is used. Otherwise one should specify the include paths that
124# are normally passed to the compiler using the -I flag.
125
126STRIP_FROM_INC_PATH    =
127
128# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
129# (but less readable) file names. This can be useful is your file systems
130# doesn't support long names like on DOS, Mac, or CD-ROM.
131
132SHORT_NAMES            = NO
133
134# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
135# will interpret the first line (until the first dot) of a JavaDoc-style
136# comment as the brief description. If set to NO, the JavaDoc
137# comments will behave just like regular Qt-style comments
138# (thus requiring an explicit @brief command for a brief description.)
139
140JAVADOC_AUTOBRIEF      = YES
141
142# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
143# interpret the first line (until the first dot) of a Qt-style
144# comment as the brief description. If set to NO, the comments
145# will behave just like regular Qt-style comments (thus requiring
146# an explicit \brief command for a brief description.)
147
148QT_AUTOBRIEF           = NO
149
150# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
151# treat a multi-line C++ special comment block (i.e. a block of //! or ///
152# comments) as a brief description. This used to be the default behaviour.
153# The new default is to treat a multi-line C++ comment block as a detailed
154# description. Set this tag to YES if you prefer the old behaviour instead.
155
156MULTILINE_CPP_IS_BRIEF = NO
157
158# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
159# member inherits the documentation from any documented member that it
160# re-implements.
161
162INHERIT_DOCS           = YES
163
164# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
165# a new page for each member. If set to NO, the documentation of a member will
166# be part of the file/class/namespace that contains it.
167
168SEPARATE_MEMBER_PAGES  = NO
169
170# The TAB_SIZE tag can be used to set the number of spaces in a tab.
171# Doxygen uses this value to replace tabs by spaces in code fragments.
172
173TAB_SIZE               = 4
174
175# This tag can be used to specify a number of aliases that acts
176# as commands in the documentation. An alias has the form "name=value".
177# For example adding "sideeffect=\par Side Effects:\n" will allow you to
178# put the command \sideeffect (or @sideeffect) in the documentation, which
179# will result in a user-defined paragraph with heading "Side Effects:".
180# You can put \n's in the value part of an alias to insert newlines.
181
182ALIASES                =
183
184# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
185# sources only. Doxygen will then generate output that is more tailored for C.
186# For instance, some of the names that are used will be different. The list
187# of all members will be omitted, etc.
188
189OPTIMIZE_OUTPUT_FOR_C  = YES
190
191# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
192# sources only. Doxygen will then generate output that is more tailored for
193# Java. For instance, namespaces will be presented as packages, qualified
194# scopes will look different, etc.
195
196OPTIMIZE_OUTPUT_JAVA   = NO
197
198# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
199# sources only. Doxygen will then generate output that is more tailored for
200# Fortran.
201
202OPTIMIZE_FOR_FORTRAN   = NO
203
204# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
205# sources. Doxygen will then generate output that is tailored for
206# VHDL.
207
208OPTIMIZE_OUTPUT_VHDL   = NO
209
210# Doxygen selects the parser to use depending on the extension of the files it parses.
211# With this tag you can assign which parser to use for a given extension.
212# Doxygen has a built-in mapping, but you can override or extend it using this tag.
213# The format is ext=language, where ext is a file extension, and language is one of
214# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
215# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
216# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
217# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
218
219EXTENSION_MAPPING      =
220
221# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
222# to include (a tag file for) the STL sources as input, then you should
223# set this tag to YES in order to let doxygen match functions declarations and
224# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
225# func(std::string) {}). This also make the inheritance and collaboration
226# diagrams that involve STL classes more complete and accurate.
227
228BUILTIN_STL_SUPPORT    = NO
229
230# If you use Microsoft's C++/CLI language, you should set this option to YES to
231# enable parsing support.
232
233CPP_CLI_SUPPORT        = NO
234
235# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
236# Doxygen will parse them like normal C++ but will assume all classes use public
237# instead of private inheritance when no explicit protection keyword is present.
238
239SIP_SUPPORT            = NO
240
241# For Microsoft's IDL there are propget and propput attributes to indicate getter
242# and setter methods for a property. Setting this option to YES (the default)
243# will make doxygen to replace the get and set methods by a property in the
244# documentation. This will only work if the methods are indeed getting or
245# setting a simple type. If this is not the case, or you want to show the
246# methods anyway, you should set this option to NO.
247
248IDL_PROPERTY_SUPPORT   = YES
249
250# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
251# tag is set to YES, then doxygen will reuse the documentation of the first
252# member in the group (if any) for the other members of the group. By default
253# all members of a group must be documented explicitly.
254
255DISTRIBUTE_GROUP_DOC   = NO
256
257# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
258# the same type (for instance a group of public functions) to be put as a
259# subgroup of that type (e.g. under the Public Functions section). Set it to
260# NO to prevent subgrouping. Alternatively, this can be done per class using
261# the \nosubgrouping command.
262
263SUBGROUPING            = YES
264
265# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
266# is documented as struct, union, or enum with the name of the typedef. So
267# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
268# with name TypeT. When disabled the typedef will appear as a member of a file,
269# namespace, or class. And the struct will be named TypeS. This can typically
270# be useful for C code in case the coding convention dictates that all compound
271# types are typedef'ed and only the typedef is referenced, never the tag name.
272
273TYPEDEF_HIDES_STRUCT   = NO
274
275# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
276# determine which symbols to keep in memory and which to flush to disk.
277# When the cache is full, less often used symbols will be written to disk.
278# For small to medium size projects (<1000 input files) the default value is
279# probably good enough. For larger projects a too small cache size can cause
280# doxygen to be busy swapping symbols to and from disk most of the time
281# causing a significant performance penality.
282# If the system has enough physical memory increasing the cache will improve the
283# performance by keeping more symbols in memory. Note that the value works on
284# a logarithmic scale so increasing the size by one will rougly double the
285# memory usage. The cache size is given by this formula:
286# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
287# corresponding to a cache size of 2^16 = 65536 symbols
288
289SYMBOL_CACHE_SIZE      = 0
290
291#---------------------------------------------------------------------------
292# Build related configuration options
293#---------------------------------------------------------------------------
294
295# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
296# documentation are documented, even if no documentation was available.
297# Private class members and static file members will be hidden unless
298# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
299
300EXTRACT_ALL            = NO
301
302# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
303# will be included in the documentation.
304
305EXTRACT_PRIVATE        = NO
306
307# If the EXTRACT_STATIC tag is set to YES all static members of a file
308# will be included in the documentation.
309
310EXTRACT_STATIC         = NO
311
312# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
313# defined locally in source files will be included in the documentation.
314# If set to NO only classes defined in header files are included.
315
316EXTRACT_LOCAL_CLASSES  = YES
317
318# This flag is only useful for Objective-C code. When set to YES local
319# methods, which are defined in the implementation section but not in
320# the interface are included in the documentation.
321# If set to NO (the default) only methods in the interface are included.
322
323EXTRACT_LOCAL_METHODS  = NO
324
325# If this flag is set to YES, the members of anonymous namespaces will be
326# extracted and appear in the documentation as a namespace called
327# 'anonymous_namespace{file}', where file will be replaced with the base
328# name of the file that contains the anonymous namespace. By default
329# anonymous namespace are hidden.
330
331EXTRACT_ANON_NSPACES   = NO
332
333# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
334# undocumented members of documented classes, files or namespaces.
335# If set to NO (the default) these members will be included in the
336# various overviews, but no documentation section is generated.
337# This option has no effect if EXTRACT_ALL is enabled.
338
339HIDE_UNDOC_MEMBERS     = NO
340
341# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
342# undocumented classes that are normally visible in the class hierarchy.
343# If set to NO (the default) these classes will be included in the various
344# overviews. This option has no effect if EXTRACT_ALL is enabled.
345
346HIDE_UNDOC_CLASSES     = NO
347
348# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
349# friend (class|struct|union) declarations.
350# If set to NO (the default) these declarations will be included in the
351# documentation.
352
353HIDE_FRIEND_COMPOUNDS  = NO
354
355# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
356# documentation blocks found inside the body of a function.
357# If set to NO (the default) these blocks will be appended to the
358# function's detailed documentation block.
359
360HIDE_IN_BODY_DOCS      = NO
361
362# The INTERNAL_DOCS tag determines if documentation
363# that is typed after a \internal command is included. If the tag is set
364# to NO (the default) then the documentation will be excluded.
365# Set it to YES to include the internal documentation.
366
367INTERNAL_DOCS          = NO
368
369# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
370# file names in lower-case letters. If set to YES upper-case letters are also
371# allowed. This is useful if you have classes or files whose names only differ
372# in case and if your file system supports case sensitive file names. Windows
373# and Mac users are advised to set this option to NO.
374
375CASE_SENSE_NAMES       = YES
376
377# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
378# will show members with their full class and namespace scopes in the
379# documentation. If set to YES the scope will be hidden.
380
381HIDE_SCOPE_NAMES       = NO
382
383# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
384# will put a list of the files that are included by a file in the documentation
385# of that file.
386
387SHOW_INCLUDE_FILES     = YES
388
389# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
390# is inserted in the documentation for inline members.
391
392INLINE_INFO            = YES
393
394# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
395# will sort the (detailed) documentation of file and class members
396# alphabetically by member name. If set to NO the members will appear in
397# declaration order.
398
399SORT_MEMBER_DOCS       = YES
400
401# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
402# brief documentation of file, namespace and class members alphabetically
403# by member name. If set to NO (the default) the members will appear in
404# declaration order.
405
406SORT_BRIEF_DOCS        = NO
407
408# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
409
410SORT_MEMBERS_CTORS_1ST = NO
411
412# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
413# hierarchy of group names into alphabetical order. If set to NO (the default)
414# the group names will appear in their defined order.
415
416SORT_GROUP_NAMES       = NO
417
418# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
419# sorted by fully-qualified names, including namespaces. If set to
420# NO (the default), the class list will be sorted only by class name,
421# not including the namespace part.
422# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
423# Note: This option applies only to the class list, not to the
424# alphabetical list.
425
426SORT_BY_SCOPE_NAME     = NO
427
428# The GENERATE_TODOLIST tag can be used to enable (YES) or
429# disable (NO) the todo list. This list is created by putting \todo
430# commands in the documentation.
431
432GENERATE_TODOLIST      = YES
433
434# The GENERATE_TESTLIST tag can be used to enable (YES) or
435# disable (NO) the test list. This list is created by putting \test
436# commands in the documentation.
437
438GENERATE_TESTLIST      = YES
439
440# The GENERATE_BUGLIST tag can be used to enable (YES) or
441# disable (NO) the bug list. This list is created by putting \bug
442# commands in the documentation.
443
444GENERATE_BUGLIST       = YES
445
446# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
447# disable (NO) the deprecated list. This list is created by putting
448# \deprecated commands in the documentation.
449
450GENERATE_DEPRECATEDLIST= YES
451
452# The ENABLED_SECTIONS tag can be used to enable conditional
453# documentation sections, marked by \if sectionname ... \endif.
454
455ENABLED_SECTIONS       =
456
457# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
458# the initial value of a variable or define consists of for it to appear in
459# the documentation. If the initializer consists of more lines than specified
460# here it will be hidden. Use a value of 0 to hide initializers completely.
461# The appearance of the initializer of individual variables and defines in the
462# documentation can be controlled using \showinitializer or \hideinitializer
463# command in the documentation regardless of this setting.
464
465MAX_INITIALIZER_LINES  = 30
466
467# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
468# at the bottom of the documentation of classes and structs. If set to YES the
469# list will mention the files that were used to generate the documentation.
470
471SHOW_USED_FILES        = YES
472
473# If the sources in your project are distributed over multiple directories
474# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
475# in the documentation. The default is NO.
476
477SHOW_DIRECTORIES       = YES
478
479# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
480# This will remove the Files entry from the Quick Index and from the
481# Folder Tree View (if specified). The default is YES.
482
483SHOW_FILES             = YES
484
485# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
486# Namespaces page.
487# This will remove the Namespaces entry from the Quick Index
488# and from the Folder Tree View (if specified). The default is YES.
489
490SHOW_NAMESPACES        = YES
491
492# The FILE_VERSION_FILTER tag can be used to specify a program or script that
493# doxygen should invoke to get the current version for each file (typically from
494# the version control system). Doxygen will invoke the program by executing (via
495# popen()) the command <command> <input-file>, where <command> is the value of
496# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
497# provided by doxygen. Whatever the program writes to standard output
498# is used as the file version. See the manual for examples.
499
500FILE_VERSION_FILTER    =
501
502# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
503# doxygen. The layout file controls the global structure of the generated output files
504# in an output format independent way. The create the layout file that represents
505# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
506# file name after the option, if omitted DoxygenLayout.xml will be used as the name
507# of the layout file.
508
509LAYOUT_FILE            =
510
511#---------------------------------------------------------------------------
512# configuration options related to warning and progress messages
513#---------------------------------------------------------------------------
514
515# The QUIET tag can be used to turn on/off the messages that are generated
516# by doxygen. Possible values are YES and NO. If left blank NO is used.
517
518QUIET                  = NO
519
520# The WARNINGS tag can be used to turn on/off the warning messages that are
521# generated by doxygen. Possible values are YES and NO. If left blank
522# NO is used.
523
524WARNINGS               = YES
525
526# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
527# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
528# automatically be disabled.
529
530WARN_IF_UNDOCUMENTED   = YES
531
532# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
533# potential errors in the documentation, such as not documenting some
534# parameters in a documented function, or documenting parameters that
535# don't exist or using markup commands wrongly.
536
537WARN_IF_DOC_ERROR      = YES
538
539# This WARN_NO_PARAMDOC option can be abled to get warnings for
540# functions that are documented, but have no documentation for their parameters
541# or return value. If set to NO (the default) doxygen will only warn about
542# wrong or incomplete parameter documentation, but not about the absence of
543# documentation.
544
545WARN_NO_PARAMDOC       = NO
546
547# The WARN_FORMAT tag determines the format of the warning messages that
548# doxygen can produce. The string should contain the $file, $line, and $text
549# tags, which will be replaced by the file and line number from which the
550# warning originated and the warning text. Optionally the format may contain
551# $version, which will be replaced by the version of the file (if it could
552# be obtained via FILE_VERSION_FILTER)
553
554WARN_FORMAT            = "$file:$line: $text "
555
556# The WARN_LOGFILE tag can be used to specify a file to which warning
557# and error messages should be written. If left blank the output is written
558# to stderr.
559
560WARN_LOGFILE           =
561
562#---------------------------------------------------------------------------
563# configuration options related to the input files
564#---------------------------------------------------------------------------
565
566# The INPUT tag can be used to specify the files and/or directories that contain
567# documented source files. You may enter file names like "myfile.cpp" or
568# directories like "/usr/src/myproject". Separate the files or directories
569# with spaces.
570
571INPUT                  = ../src
572
573# This tag can be used to specify the character encoding of the source files
574# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
575# also the default input encoding. Doxygen uses libiconv (or the iconv built
576# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
577# the list of possible encodings.
578
579INPUT_ENCODING         = UTF-8
580
581# If the value of the INPUT tag contains directories, you can use the
582# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
583# and *.h) to filter out the source-files in the directories. If left
584# blank the following patterns are tested:
585# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
586# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
587
588FILE_PATTERNS          = aubio.h \
589                         types.h \
590                         fvec.h \
591                         cvec.h \
592                         lvec.h \
593                         musicutils.h \
594                         resampler.h \
595                         filter.h \
596                         biquad.h \
597                         a_weighting.h \
598                         c_weighting.h \
599                         fft.h \
600                         phasevoc.h \
601                         filterbank.h \
602                         filterbank_mel.h \
603                         mfcc.h \
604                         specdesc.h \
605                         pitch.h \
606                         onset.h \
607                         peakpicker.h \
608                         tempo.h
609
610# The RECURSIVE tag can be used to turn specify whether or not subdirectories
611# should be searched for input files as well. Possible values are YES and NO.
612# If left blank NO is used.
613
614RECURSIVE              = YES
615
616# The EXCLUDE tag can be used to specify files and/or directories that should
617# excluded from the INPUT source files. This way you can easily exclude a
618# subdirectory from a directory tree whose root is specified with the INPUT tag.
619
620EXCLUDE                = ../src/aubio_priv.h \
621                         ../src/temporal/filter_priv.h
622
623# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
624# directories that are symbolic links (a Unix filesystem feature) are excluded
625# from the input.
626
627EXCLUDE_SYMLINKS       = NO
628
629# If the value of the INPUT tag contains directories, you can use the
630# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
631# certain files from those directories. Note that the wildcards are matched
632# against the file with absolute path, so to exclude all test directories
633# for example use the pattern */test/*
634
635EXCLUDE_PATTERNS       =
636
637# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
638# (namespaces, classes, functions, etc.) that should be excluded from the
639# output. The symbol name can be a fully qualified name, a word, or if the
640# wildcard * is used, a substring. Examples: ANamespace, AClass,
641# AClass::ANamespace, ANamespace::*Test
642
643EXCLUDE_SYMBOLS        =
644
645# The EXAMPLE_PATH tag can be used to specify one or more files or
646# directories that contain example code fragments that are included (see
647# the \include command).
648
649EXAMPLE_PATH           = ../examples \
650                         ../tests/src
651
652# If the value of the EXAMPLE_PATH tag contains directories, you can use the
653# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
654# and *.h) to filter out the source-files in the directories. If left
655# blank all files are included.
656
657EXAMPLE_PATTERNS       =
658
659# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
660# searched for input files to be used with the \include or \dontinclude
661# commands irrespective of the value of the RECURSIVE tag.
662# Possible values are YES and NO. If left blank NO is used.
663
664EXAMPLE_RECURSIVE      = NO
665
666# The IMAGE_PATH tag can be used to specify one or more files or
667# directories that contain image that are included in the documentation (see
668# the \image command).
669
670IMAGE_PATH             =
671
672# The INPUT_FILTER tag can be used to specify a program that doxygen should
673# invoke to filter for each input file. Doxygen will invoke the filter program
674# by executing (via popen()) the command <filter> <input-file>, where <filter>
675# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
676# input file. Doxygen will then use the output that the filter program writes
677# to standard output.
678# If FILTER_PATTERNS is specified, this tag will be
679# ignored.
680
681INPUT_FILTER           =
682
683# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
684# basis.
685# Doxygen will compare the file name with each pattern and apply the
686# filter if there is a match.
687# The filters are a list of the form:
688# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
689# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
690# is applied to all files.
691
692FILTER_PATTERNS        =
693
694# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
695# INPUT_FILTER) will be used to filter the input files when producing source
696# files to browse (i.e. when SOURCE_BROWSER is set to YES).
697
698FILTER_SOURCE_FILES    = NO
699
700#---------------------------------------------------------------------------
701# configuration options related to source browsing
702#---------------------------------------------------------------------------
703
704# If the SOURCE_BROWSER tag is set to YES then a list of source files will
705# be generated. Documented entities will be cross-referenced with these sources.
706# Note: To get rid of all source code in the generated output, make sure also
707# VERBATIM_HEADERS is set to NO.
708
709SOURCE_BROWSER         = YES
710
711# Setting the INLINE_SOURCES tag to YES will include the body
712# of functions and classes directly in the documentation.
713
714INLINE_SOURCES         = NO
715
716# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
717# doxygen to hide any special comment blocks from generated source code
718# fragments. Normal C and C++ comments will always remain visible.
719
720STRIP_CODE_COMMENTS    = NO
721
722# If the REFERENCED_BY_RELATION tag is set to YES
723# then for each documented function all documented
724# functions referencing it will be listed.
725
726REFERENCED_BY_RELATION = YES
727
728# If the REFERENCES_RELATION tag is set to YES
729# then for each documented function all documented entities
730# called/used by that function will be listed.
731
732REFERENCES_RELATION    = YES
733
734# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
735# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
736# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
737# link to the source code.
738# Otherwise they will link to the documentation.
739
740REFERENCES_LINK_SOURCE = YES
741
742# If the USE_HTAGS tag is set to YES then the references to source code
743# will point to the HTML generated by the htags(1) tool instead of doxygen
744# built-in source browser. The htags tool is part of GNU's global source
745# tagging system (see http://www.gnu.org/software/global/global.html). You
746# will need version 4.8.6 or higher.
747
748USE_HTAGS              = NO
749
750# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
751# will generate a verbatim copy of the header file for each class for
752# which an include is specified. Set to NO to disable this.
753
754VERBATIM_HEADERS       = YES
755
756#---------------------------------------------------------------------------
757# configuration options related to the alphabetical class index
758#---------------------------------------------------------------------------
759
760# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
761# of all compounds will be generated. Enable this if the project
762# contains a lot of classes, structs, unions or interfaces.
763
764ALPHABETICAL_INDEX     = NO
765
766# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
767# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
768# in which this list will be split (can be a number in the range [1..20])
769
770COLS_IN_ALPHA_INDEX    = 5
771
772# In case all classes in a project start with a common prefix, all
773# classes will be put under the same header in the alphabetical index.
774# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
775# should be ignored while generating the index headers.
776
777IGNORE_PREFIX          =
778
779#---------------------------------------------------------------------------
780# configuration options related to the HTML output
781#---------------------------------------------------------------------------
782
783# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
784# generate HTML output.
785
786GENERATE_HTML          = YES
787
788# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
789# If a relative path is entered the value of OUTPUT_DIRECTORY will be
790# put in front of it. If left blank `html' will be used as the default path.
791
792HTML_OUTPUT            = html
793
794# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
795# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
796# doxygen will generate files with .html extension.
797
798HTML_FILE_EXTENSION    = .html
799
800# The HTML_HEADER tag can be used to specify a personal HTML header for
801# each generated HTML page. If it is left blank doxygen will generate a
802# standard header.
803
804HTML_HEADER            = header.html
805
806# The HTML_FOOTER tag can be used to specify a personal HTML footer for
807# each generated HTML page. If it is left blank doxygen will generate a
808# standard footer.
809
810HTML_FOOTER            =
811
812# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
813# style sheet that is used by each HTML page. It can be used to
814# fine-tune the look of the HTML output. If the tag is left blank doxygen
815# will generate a default style sheet. Note that doxygen will try to copy
816# the style sheet file to the HTML output directory, so don't put your own
817# stylesheet in the HTML output directory as well, or it will be erased!
818
819HTML_STYLESHEET        =
820
821# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
822# files or namespaces will be aligned in HTML using tables. If set to
823# NO a bullet list will be used.
824
825HTML_ALIGN_MEMBERS     = YES
826
827# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
828# documentation will contain sections that can be hidden and shown after the
829# page has loaded. For this to work a browser that supports
830# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
831# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
832
833HTML_DYNAMIC_SECTIONS  = NO
834
835# If the GENERATE_DOCSET tag is set to YES, additional index files
836# will be generated that can be used as input for Apple's Xcode 3
837# integrated development environment, introduced with OSX 10.5 (Leopard).
838# To create a documentation set, doxygen will generate a Makefile in the
839# HTML output directory. Running make will produce the docset in that
840# directory and running "make install" will install the docset in
841# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
842# it at startup.
843# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
844
845GENERATE_DOCSET        = NO
846
847# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
848# feed. A documentation feed provides an umbrella under which multiple
849# documentation sets from a single provider (such as a company or product suite)
850# can be grouped.
851
852DOCSET_FEEDNAME        = "Doxygen generated docs"
853
854# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
855# should uniquely identify the documentation set bundle. This should be a
856# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
857# will append .docset to the name.
858
859DOCSET_BUNDLE_ID       = org.doxygen.Project
860
861# If the GENERATE_HTMLHELP tag is set to YES, additional index files
862# will be generated that can be used as input for tools like the
863# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
864# of the generated HTML documentation.
865
866GENERATE_HTMLHELP      = NO
867
868# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
869# be used to specify the file name of the resulting .chm file. You
870# can add a path in front of the file if the result should not be
871# written to the html output directory.
872
873CHM_FILE               =
874
875# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
876# be used to specify the location (absolute path including file name) of
877# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
878# the HTML help compiler on the generated index.hhp.
879
880HHC_LOCATION           =
881
882# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
883# controls if a separate .chi index file is generated (YES) or that
884# it should be included in the master .chm file (NO).
885
886GENERATE_CHI           = NO
887
888# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
889# is used to encode HtmlHelp index (hhk), content (hhc) and project file
890# content.
891
892CHM_INDEX_ENCODING     =
893
894# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
895# controls whether a binary table of contents is generated (YES) or a
896# normal table of contents (NO) in the .chm file.
897
898BINARY_TOC             = NO
899
900# The TOC_EXPAND flag can be set to YES to add extra items for group members
901# to the contents of the HTML help documentation and to the tree view.
902
903TOC_EXPAND             = NO
904
905# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
906# are set, an additional index file will be generated that can be used as input for
907# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
908# HTML documentation.
909
910GENERATE_QHP           = NO
911
912# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
913# be used to specify the file name of the resulting .qch file.
914# The path specified is relative to the HTML output folder.
915
916QCH_FILE               =
917
918# The QHP_NAMESPACE tag specifies the namespace to use when generating
919# Qt Help Project output. For more information please see
920# http://doc.trolltech.com/qthelpproject.html#namespace
921
922QHP_NAMESPACE          =
923
924# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
925# Qt Help Project output. For more information please see
926# http://doc.trolltech.com/qthelpproject.html#virtual-folders
927
928QHP_VIRTUAL_FOLDER     = doc
929
930# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
931# For more information please see
932# http://doc.trolltech.com/qthelpproject.html#custom-filters
933
934QHP_CUST_FILTER_NAME   =
935
936# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
937# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
938
939QHP_CUST_FILTER_ATTRS  =
940
941# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
942# filter section matches.
943# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
944
945QHP_SECT_FILTER_ATTRS  =
946
947# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
948# be used to specify the location of Qt's qhelpgenerator.
949# If non-empty doxygen will try to run qhelpgenerator on the generated
950# .qhp file.
951
952QHG_LOCATION           =
953
954# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
955# top of each HTML page. The value NO (the default) enables the index and
956# the value YES disables it.
957
958DISABLE_INDEX          = NO
959
960# This tag can be used to set the number of enum values (range [1..20])
961# that doxygen will group on one line in the generated HTML documentation.
962
963ENUM_VALUES_PER_LINE   = 4
964
965# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
966# structure should be generated to display hierarchical information.
967# If the tag value is set to YES, a side panel will be generated
968# containing a tree-like index structure (just like the one that
969# is generated for HTML Help). For this to work a browser that supports
970# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
971# Windows users are probably better off using the HTML help feature.
972
973GENERATE_TREEVIEW      = NO
974
975# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
976# and Class Hierarchy pages using a tree view instead of an ordered list.
977
978USE_INLINE_TREES       = NO
979
980# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
981# used to set the initial width (in pixels) of the frame in which the tree
982# is shown.
983
984TREEVIEW_WIDTH         = 250
985
986# Use this tag to change the font size of Latex formulas included
987# as images in the HTML documentation. The default is 10. Note that
988# when you change the font size after a successful doxygen run you need
989# to manually remove any form_*.png images from the HTML output directory
990# to force them to be regenerated.
991
992FORMULA_FONTSIZE       = 10
993
994# When the SEARCHENGINE tag is enable doxygen will generate a search box for the HTML output. The underlying search engine uses javascript
995# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP) or Qt help (GENERATE_QHP)
996# there is already a search function so this one should typically
997# be disabled.
998
999SEARCHENGINE           = YES
1000
1001#---------------------------------------------------------------------------
1002# configuration options related to the LaTeX output
1003#---------------------------------------------------------------------------
1004
1005# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
1006# generate Latex output.
1007
1008GENERATE_LATEX         = NO
1009
1010# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1011# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1012# put in front of it. If left blank `latex' will be used as the default path.
1013
1014LATEX_OUTPUT           = latex
1015
1016# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1017# invoked. If left blank `latex' will be used as the default command name.
1018
1019LATEX_CMD_NAME         = latex
1020
1021# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1022# generate index for LaTeX. If left blank `makeindex' will be used as the
1023# default command name.
1024
1025MAKEINDEX_CMD_NAME     = makeindex
1026
1027# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1028# LaTeX documents. This may be useful for small projects and may help to
1029# save some trees in general.
1030
1031COMPACT_LATEX          = NO
1032
1033# The PAPER_TYPE tag can be used to set the paper type that is used
1034# by the printer. Possible values are: a4, a4wide, letter, legal and
1035# executive. If left blank a4wide will be used.
1036
1037PAPER_TYPE             = a4wide
1038
1039# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1040# packages that should be included in the LaTeX output.
1041
1042EXTRA_PACKAGES         =
1043
1044# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1045# the generated latex document. The header should contain everything until
1046# the first chapter. If it is left blank doxygen will generate a
1047# standard header. Notice: only use this tag if you know what you are doing!
1048
1049LATEX_HEADER           =
1050
1051# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1052# is prepared for conversion to pdf (using ps2pdf). The pdf file will
1053# contain links (just like the HTML output) instead of page references
1054# This makes the output suitable for online browsing using a pdf viewer.
1055
1056PDF_HYPERLINKS         = NO
1057
1058# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1059# plain latex in the generated Makefile. Set this option to YES to get a
1060# higher quality PDF documentation.
1061
1062USE_PDFLATEX           = NO
1063
1064# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1065# command to the generated LaTeX files. This will instruct LaTeX to keep
1066# running if errors occur, instead of asking the user for help.
1067# This option is also used when generating formulas in HTML.
1068
1069LATEX_BATCHMODE        = NO
1070
1071# If LATEX_HIDE_INDICES is set to YES then doxygen will not
1072# include the index chapters (such as File Index, Compound Index, etc.)
1073# in the output.
1074
1075LATEX_HIDE_INDICES     = NO
1076
1077# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
1078
1079LATEX_SOURCE_CODE      = NO
1080
1081#---------------------------------------------------------------------------
1082# configuration options related to the RTF output
1083#---------------------------------------------------------------------------
1084
1085# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1086# The RTF output is optimized for Word 97 and may not look very pretty with
1087# other RTF readers or editors.
1088
1089GENERATE_RTF           = NO
1090
1091# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1092# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1093# put in front of it. If left blank `rtf' will be used as the default path.
1094
1095RTF_OUTPUT             = rtf
1096
1097# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1098# RTF documents. This may be useful for small projects and may help to
1099# save some trees in general.
1100
1101COMPACT_RTF            = NO
1102
1103# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1104# will contain hyperlink fields. The RTF file will
1105# contain links (just like the HTML output) instead of page references.
1106# This makes the output suitable for online browsing using WORD or other
1107# programs which support those fields.
1108# Note: wordpad (write) and others do not support links.
1109
1110RTF_HYPERLINKS         = NO
1111
1112# Load stylesheet definitions from file. Syntax is similar to doxygen's
1113# config file, i.e. a series of assignments. You only have to provide
1114# replacements, missing definitions are set to their default value.
1115
1116RTF_STYLESHEET_FILE    =
1117
1118# Set optional variables used in the generation of an rtf document.
1119# Syntax is similar to doxygen's config file.
1120
1121RTF_EXTENSIONS_FILE    =
1122
1123#---------------------------------------------------------------------------
1124# configuration options related to the man page output
1125#---------------------------------------------------------------------------
1126
1127# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1128# generate man pages
1129
1130GENERATE_MAN           = NO
1131
1132# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1133# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1134# put in front of it. If left blank `man' will be used as the default path.
1135
1136MAN_OUTPUT             = man
1137
1138# The MAN_EXTENSION tag determines the extension that is added to
1139# the generated man pages (default is the subroutine's section .3)
1140
1141MAN_EXTENSION          = .3
1142
1143# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1144# then it will generate one additional man file for each entity
1145# documented in the real man page(s). These additional files
1146# only source the real man page, but without them the man command
1147# would be unable to find the correct page. The default is NO.
1148
1149MAN_LINKS              = NO
1150
1151#---------------------------------------------------------------------------
1152# configuration options related to the XML output
1153#---------------------------------------------------------------------------
1154
1155# If the GENERATE_XML tag is set to YES Doxygen will
1156# generate an XML file that captures the structure of
1157# the code including all documentation.
1158
1159GENERATE_XML           = NO
1160
1161# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1162# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1163# put in front of it. If left blank `xml' will be used as the default path.
1164
1165XML_OUTPUT             = xml
1166
1167# The XML_SCHEMA tag can be used to specify an XML schema,
1168# which can be used by a validating XML parser to check the
1169# syntax of the XML files.
1170
1171XML_SCHEMA             =
1172
1173# The XML_DTD tag can be used to specify an XML DTD,
1174# which can be used by a validating XML parser to check the
1175# syntax of the XML files.
1176
1177XML_DTD                =
1178
1179# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1180# dump the program listings (including syntax highlighting
1181# and cross-referencing information) to the XML output. Note that
1182# enabling this will significantly increase the size of the XML output.
1183
1184XML_PROGRAMLISTING     = YES
1185
1186#---------------------------------------------------------------------------
1187# configuration options for the AutoGen Definitions output
1188#---------------------------------------------------------------------------
1189
1190# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1191# generate an AutoGen Definitions (see autogen.sf.net) file
1192# that captures the structure of the code including all
1193# documentation. Note that this feature is still experimental
1194# and incomplete at the moment.
1195
1196GENERATE_AUTOGEN_DEF   = NO
1197
1198#---------------------------------------------------------------------------
1199# configuration options related to the Perl module output
1200#---------------------------------------------------------------------------
1201
1202# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1203# generate a Perl module file that captures the structure of
1204# the code including all documentation. Note that this
1205# feature is still experimental and incomplete at the
1206# moment.
1207
1208GENERATE_PERLMOD       = NO
1209
1210# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1211# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1212# to generate PDF and DVI output from the Perl module output.
1213
1214PERLMOD_LATEX          = NO
1215
1216# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1217# nicely formatted so it can be parsed by a human reader.
1218# This is useful
1219# if you want to understand what is going on.
1220# On the other hand, if this
1221# tag is set to NO the size of the Perl module output will be much smaller
1222# and Perl will parse it just the same.
1223
1224PERLMOD_PRETTY         = YES
1225
1226# The names of the make variables in the generated doxyrules.make file
1227# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1228# This is useful so different doxyrules.make files included by the same
1229# Makefile don't overwrite each other's variables.
1230
1231PERLMOD_MAKEVAR_PREFIX =
1232
1233#---------------------------------------------------------------------------
1234# Configuration options related to the preprocessor
1235#---------------------------------------------------------------------------
1236
1237# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1238# evaluate all C-preprocessor directives found in the sources and include
1239# files.
1240
1241ENABLE_PREPROCESSING   = YES
1242
1243# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1244# names in the source code. If set to NO (the default) only conditional
1245# compilation will be performed. Macro expansion can be done in a controlled
1246# way by setting EXPAND_ONLY_PREDEF to YES.
1247
1248MACRO_EXPANSION        = NO
1249
1250# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1251# then the macro expansion is limited to the macros specified with the
1252# PREDEFINED and EXPAND_AS_DEFINED tags.
1253
1254EXPAND_ONLY_PREDEF     = NO
1255
1256# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1257# in the INCLUDE_PATH (see below) will be search if a #include is found.
1258
1259SEARCH_INCLUDES        = YES
1260
1261# The INCLUDE_PATH tag can be used to specify one or more directories that
1262# contain include files that are not input files but should be processed by
1263# the preprocessor.
1264
1265INCLUDE_PATH           =
1266
1267# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1268# patterns (like *.h and *.hpp) to filter out the header-files in the
1269# directories. If left blank, the patterns specified with FILE_PATTERNS will
1270# be used.
1271
1272INCLUDE_FILE_PATTERNS  =
1273
1274# The PREDEFINED tag can be used to specify one or more macro names that
1275# are defined before the preprocessor is started (similar to the -D option of
1276# gcc). The argument of the tag is a list of macros of the form: name
1277# or name=definition (no spaces). If the definition and the = are
1278# omitted =1 is assumed. To prevent a macro definition from being
1279# undefined via #undef or recursively expanded use the := operator
1280# instead of the = operator.
1281
1282PREDEFINED             =
1283
1284# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1285# this tag can be used to specify a list of macro names that should be expanded.
1286# The macro definition that is found in the sources will be used.
1287# Use the PREDEFINED tag if you want to use a different macro definition.
1288
1289EXPAND_AS_DEFINED      =
1290
1291# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1292# doxygen's preprocessor will remove all function-like macros that are alone
1293# on a line, have an all uppercase name, and do not end with a semicolon. Such
1294# function macros are typically used for boiler-plate code, and will confuse
1295# the parser if not removed.
1296
1297SKIP_FUNCTION_MACROS   = YES
1298
1299#---------------------------------------------------------------------------
1300# Configuration::additions related to external references
1301#---------------------------------------------------------------------------
1302
1303# The TAGFILES option can be used to specify one or more tagfiles.
1304# Optionally an initial location of the external documentation
1305# can be added for each tagfile. The format of a tag file without
1306# this location is as follows:
1307#
1308# TAGFILES = file1 file2 ...
1309# Adding location for the tag files is done as follows:
1310#
1311# TAGFILES = file1=loc1 "file2 = loc2" ...
1312# where "loc1" and "loc2" can be relative or absolute paths or
1313# URLs. If a location is present for each tag, the installdox tool
1314# does not have to be run to correct the links.
1315# Note that each tag file must have a unique name
1316# (where the name does NOT include the path)
1317# If a tag file is not located in the directory in which doxygen
1318# is run, you must also specify the path to the tagfile here.
1319
1320TAGFILES               =
1321
1322# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1323# a tag file that is based on the input files it reads.
1324
1325GENERATE_TAGFILE       =
1326
1327# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1328# in the class index. If set to NO only the inherited external classes
1329# will be listed.
1330
1331ALLEXTERNALS           = NO
1332
1333# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1334# in the modules index. If set to NO, only the current project's groups will
1335# be listed.
1336
1337EXTERNAL_GROUPS        = YES
1338
1339# The PERL_PATH should be the absolute path and name of the perl script
1340# interpreter (i.e. the result of `which perl').
1341
1342PERL_PATH              = /usr/bin/perl
1343
1344#---------------------------------------------------------------------------
1345# Configuration options related to the dot tool
1346#---------------------------------------------------------------------------
1347
1348# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1349# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1350# or super classes. Setting the tag to NO turns the diagrams off. Note that
1351# this option is superseded by the HAVE_DOT option below. This is only a
1352# fallback. It is recommended to install and use dot, since it yields more
1353# powerful graphs.
1354
1355CLASS_DIAGRAMS         = YES
1356
1357# You can define message sequence charts within doxygen comments using the \msc
1358# command. Doxygen will then run the mscgen tool (see
1359# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1360# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1361# the mscgen tool resides. If left empty the tool is assumed to be found in the
1362# default search path.
1363
1364MSCGEN_PATH            =
1365
1366# If set to YES, the inheritance and collaboration graphs will hide
1367# inheritance and usage relations if the target is undocumented
1368# or is not a class.
1369
1370HIDE_UNDOC_RELATIONS   = YES
1371
1372# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1373# available from the path. This tool is part of Graphviz, a graph visualization
1374# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1375# have no effect if this option is set to NO (the default)
1376
1377HAVE_DOT               = YES
1378
1379# By default doxygen will write a font called FreeSans.ttf to the output
1380# directory and reference it in all dot files that doxygen generates. This
1381# font does not include all possible unicode characters however, so when you need
1382# these (or just want a differently looking font) you can specify the font name
1383# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
1384# which can be done by putting it in a standard location or by setting the
1385# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
1386# containing the font.
1387
1388DOT_FONTNAME           = FreeSans
1389
1390# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1391# The default size is 10pt.
1392
1393DOT_FONTSIZE           = 10
1394
1395# By default doxygen will tell dot to use the output directory to look for the
1396# FreeSans.ttf font (which doxygen will put there itself). If you specify a
1397# different font using DOT_FONTNAME you can set the path where dot
1398# can find it using this tag.
1399
1400DOT_FONTPATH           =
1401
1402# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1403# will generate a graph for each documented class showing the direct and
1404# indirect inheritance relations. Setting this tag to YES will force the
1405# the CLASS_DIAGRAMS tag to NO.
1406
1407CLASS_GRAPH            = YES
1408
1409# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1410# will generate a graph for each documented class showing the direct and
1411# indirect implementation dependencies (inheritance, containment, and
1412# class references variables) of the class with other documented classes.
1413
1414COLLABORATION_GRAPH    = YES
1415
1416# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1417# will generate a graph for groups, showing the direct groups dependencies
1418
1419GROUP_GRAPHS           = YES
1420
1421# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1422# collaboration diagrams in a style similar to the OMG's Unified Modeling
1423# Language.
1424
1425UML_LOOK               = NO
1426
1427# If set to YES, the inheritance and collaboration graphs will show the
1428# relations between templates and their instances.
1429
1430TEMPLATE_RELATIONS     = NO
1431
1432# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1433# tags are set to YES then doxygen will generate a graph for each documented
1434# file showing the direct and indirect include dependencies of the file with
1435# other documented files.
1436
1437INCLUDE_GRAPH          = YES
1438
1439# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1440# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1441# documented header file showing the documented files that directly or
1442# indirectly include this file.
1443
1444INCLUDED_BY_GRAPH      = YES
1445
1446# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1447# doxygen will generate a call dependency graph for every global function
1448# or class method. Note that enabling this option will significantly increase
1449# the time of a run. So in most cases it will be better to enable call graphs
1450# for selected functions only using the \callgraph command.
1451
1452CALL_GRAPH             = NO
1453
1454# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1455# doxygen will generate a caller dependency graph for every global function
1456# or class method. Note that enabling this option will significantly increase
1457# the time of a run. So in most cases it will be better to enable caller
1458# graphs for selected functions only using the \callergraph command.
1459
1460CALLER_GRAPH           = NO
1461
1462# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1463# will graphical hierarchy of all classes instead of a textual one.
1464
1465GRAPHICAL_HIERARCHY    = YES
1466
1467# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1468# then doxygen will show the dependencies a directory has on other directories
1469# in a graphical way. The dependency relations are determined by the #include
1470# relations between the files in the directories.
1471
1472DIRECTORY_GRAPH        = YES
1473
1474# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1475# generated by dot. Possible values are png, jpg, or gif
1476# If left blank png will be used.
1477
1478DOT_IMAGE_FORMAT       = png
1479
1480# The tag DOT_PATH can be used to specify the path where the dot tool can be
1481# found. If left blank, it is assumed the dot tool can be found in the path.
1482
1483DOT_PATH               =
1484
1485# The DOTFILE_DIRS tag can be used to specify one or more directories that
1486# contain dot files that are included in the documentation (see the
1487# \dotfile command).
1488
1489DOTFILE_DIRS           =
1490
1491# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1492# nodes that will be shown in the graph. If the number of nodes in a graph
1493# becomes larger than this value, doxygen will truncate the graph, which is
1494# visualized by representing a node as a red box. Note that doxygen if the
1495# number of direct children of the root node in a graph is already larger than
1496# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1497# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1498
1499DOT_GRAPH_MAX_NODES    = 50
1500
1501# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1502# graphs generated by dot. A depth value of 3 means that only nodes reachable
1503# from the root by following a path via at most 3 edges will be shown. Nodes
1504# that lay further from the root node will be omitted. Note that setting this
1505# option to 1 or 2 may greatly reduce the computation time needed for large
1506# code bases. Also note that the size of a graph can be further restricted by
1507# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1508
1509MAX_DOT_GRAPH_DEPTH    = 0
1510
1511# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1512# background. This is disabled by default, because dot on Windows does not
1513# seem to support this out of the box. Warning: Depending on the platform used,
1514# enabling this option may lead to badly anti-aliased labels on the edges of
1515# a graph (i.e. they become hard to read).
1516
1517DOT_TRANSPARENT        = NO
1518
1519# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1520# files in one run (i.e. multiple -o and -T options on the command line). This
1521# makes dot run faster, but since only newer versions of dot (>1.8.10)
1522# support this, this feature is disabled by default.
1523
1524DOT_MULTI_TARGETS      = NO
1525
1526# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1527# generate a legend page explaining the meaning of the various boxes and
1528# arrows in the dot generated graphs.
1529
1530GENERATE_LEGEND        = YES
1531
1532# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1533# remove the intermediate dot files that are used to generate
1534# the various graphs.
1535
1536DOT_CLEANUP            = YES
Note: See TracBrowser for help on using the repository browser.